FieldServer FS-8700-40 instruction manual Appendix A.1. Specifying a Poller Map Descriptor length

Page 22

 

FS-8700-40 SBT FSI Driver Manual

Page 22 of 29

 

 

 

 

 

 

 

 

 

Appendix A. Advanced Topics

Appendix A.1. Specifying a Poller Map Descriptor length

The poller Map Descriptor is responsible for checking a remote MXL/XLS device for events. When events are received the poller Map Descriptor increments counters at various offsets in the Data Array specified by the poller Map Descriptor. The offsets and their meanings are explained under the Client configuration section of this Driver Manual.

The poller Map Descriptor’s Data Array contains sets of 19 elements or counters. Each set of counters represents the events from a panel. The Block_Number is used to specify the lowest panel number from which events will be received. The highest Node_ID of any passive Map Descriptor on the same port as the poller Map Descriptor specifies the highest panel number from which events will be received. The poller Map Descriptor’s length has to be at least 19 and has to incremented by 19 for every extra panel above the Block_Number from which events will be received.

If a poller Map Descriptor length is set below 19 and for example, event “System Reset” is received which needs to be mapped at offset 18 in the Data Array, the following kernel message will be printed:

“Cannot store alarm event type counts!”, 11010” ‘offset=%u,da=%s”

Example 1: Only receive events from panel 7

•Passive event Map Descriptor’s Node Id = 7 (X)

•Poller Map Descriptor’s Block_Number = 7 (Y)

•Poller Map Descriptor’s Length = (X – Y) * 19 + 19 = 19

•Event counters for panel 7 will reside in the first 19 elements.

Example 2: Receive events from panel 7 and 6

•Passive event Map Descriptor’s Node Id = 7 (X)

•Poller Map Descriptor’s Block_Number = 6 (Y)

•Poller Map Descriptor’s Length = (X – Y) * 19 + 19 = 38

•Event counters for panel 6 will reside in the first 19 elements and those for panel 7 in the next 19 elements.

Warning: An error will be generated when an event arrives from a panel with a number lower than the Block_Number of the poller. The poller Map Descriptor’s Block_Number must equal the lowest panel number for which a passive Map Descriptor exists on the same port.

FieldServer Technologies 1991 Tarob Court Milpitas, California

95035 USA Web: www.fieldserver.com

Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509

1970 email: support@fieldserver.com

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Applicability & Effectivity Sierra Monitor CompanyTable of Contents Provided by the Supplier of 3rd Party Equipment Hardware Required 3r d Party ConfigurationSupplied by FieldServer Technologies for this driver FS-8700-40 SBT FSI Driver ManualUsing the NIM-1R or NIM-1W for MXL Hardware ConnectionsFSI Connection Notes FSIConfiguring the Fieldserver AS a SBT-FSI Client FS-8700-40 SBT FSI Driver Manual Column Title Function Legal Values Data ArraysSection Title ExampleMXL, XLS Client Side Connection DescriptionsSBT-FSI Second ExampleClient Side Node Descriptors FS-8700-40 SBT FSI Driver ManualPage 11 Driver Related Map Descriptor ParametersTiming Parameters XLSRdbc FS-8700-40 SBT FSI Driver Manual Map Descriptor example 2 Monitoring Analog Loop Devices Advanced Client Configuration Using Bidirectional Capability Configuring the Fieldserver AS a SBT-FSI Server Device TypeServer Side Connection Descriptors NoneServer Side Node Descriptors Driver Specific Map Descriptor Parameters FS-8700-40 SBT FSI Driver ManualPage 19FS-8700-40 SBT FSI Driver Manual FS-8700-40 SBT FSI Driver Manual Example 1 Only receive events from panel Appendix A.1. Specifying a Poller Map Descriptor lengthExample 2 Receive events from panel 7 Appendix A.2. Interpreting Panel Error Messages TroubleInput DE-ISOLATED Appendix A.4. Using Trouble CodesMXL/XLS Trouble Codes Input IsolatedBell 2 Isolated Bell 2 DE-ISOLATEDFS-8700-40 SBT FSI Driver Manual Appendix A.5. Activating and De-activating Entities MXLAppendix A.6. Arming and De-Arming Entities MXLXLS

FS-8700-40 specifications

The FieldServer FS-8700-40 is an advanced protocol gateway that plays an essential role in the integration of diverse building management systems and industrial automation environments. Renowned for its robustness and versatility, the FS-8700-40 is engineered to facilitate seamless communication between a variety of devices and networks, which enhances operational efficiency and flexibility.

One of the standout features of the FS-8700-40 is its support for multiple protocols. The device is compatible with a wide range of protocols prevalent in the industry, including BACnet, Modbus, LonWorks, and many others. This multi-protocol capability allows users to connect devices from different manufacturers without the need for extensive customization or the installation of multiple gateways, thus simplifying system architecture and reducing costs.

The FS-8700-40 is equipped with a powerful microprocessor that ensures high performance and reliability. Its processing capabilities enable it to handle complex data exchanges and logic operations, making it suitable for both small scale and large scale applications. The device also features an extensive memory capacity, aiding in the storage and retrieval of large datasets necessary for sophisticated control strategies and reporting functionalities.

Another prominent characteristic of the FS-8700-40 is its user-friendly interface. The device comes with a web-based graphical user interface (GUI) that allows for easy configuration and monitoring. Users can easily set up and modify communication parameters, visualize data trends, and implement system changes in real time, all from an accessible online portal. This enhances user experience and decreases the time needed for system maintenance and updates.

Security is also a critical consideration in the design of the FS-8700-40. The device incorporates advanced security measures to protect sensitive data and ensure secure communication between connected devices. This includes features such as user authentication, data encryption, and secure sockets layer (SSL) support, which fortify the overall integrity of the system.

In addition to its technological prowess, the FS-8700-40 is designed to be highly durable and reliable in various operational conditions. With features like temperature resistance and surge protection, it boasts an extended lifespan and requires minimal maintenance, making it a cost-effective solution for users.

In summary, the FieldServer FS-8700-40 stands out due to its multi-protocol support, high processing capabilities, user-friendly interface, robust security, and durability. Its ability to facilitate communication between heterogeneous systems makes it an indispensable tool for businesses looking to optimize their operational efficiency and future-proof their infrastructure.
Top Page Image Contents