FieldServer Notifier AM6000 Description, FS-8700-52 Notifier AM6000, Driver Manual

Page 3

FS-8700-52 Notifier AM6000

Driver Manual

1. Notifier AM6000 Description

The Notifier AM6000 driver is a seial driver. It allows the FieldServer to transfer data from a Notifier AM6000 panel over either RS232 or RS485 using Notifier AM6000 protocol. There are eight RS232 and two RS485 ports standard on the FieldServer. The FieldServer can only a passive Client.

The driver receives messages intended for a system printer, interprets these messages by filling in data arrays in the FieldServer. This data is available for other devices or PLC's to read.

FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042

Visit our website: www.fieldserver.com E-mail: support@fieldserver.com

Page 1

Image 3

Contents FS-8700-52 Notifier AM6000 Supplement to the FieldServer Instruction ManualAPPLICABILITY & EFFECTIVITY Effective for all systems manufactured after May 1CONFIGURING THE FIELDSERVER AS A NOTIFIER AM6000 CLIENT FS-8700-52 Notifier AM6000Driver Manual TABLE OF CONTENTS1. Notifier AM6000 Description Technologies 2. Driver Scope of Supply 2.1 Supplied by FieldServer for this driverFieldServer DESCRIPTION3. Hardware Connections Column Title 4. Configuring the FieldServer as a Notifier AM6000 Client4.1 Data Arrays Section TitleNone default 1 second4.2 Client Side Connections 4.3 Client Side Nodes4.4 Client Side Map Descriptors 4.4.1 FieldSe rver Specific Map Descriptor Parameters4.4.2 Driver Specific Map Descriptor Parameters 0.1s 4.4.3 Timing ParametersScanInterval Rate at which data is polledThe range of 4.4.4 Map Descriptor ExampleAll map descriptors for the AM6000 Notifier driver must be passive system-trbl 5. Driver Notes 5.1 Map Descriptor Keywords5.1.1 AM6000TypeID device-only5.1.2 AM6000Status 5.1.3 AM6000Ackable5.1.4 AM6000Simulation 5.2 Statistics Ignored Messages Catching Ignored Messages Message 5.3 Listing of System Trouble Messages