FieldServer FS-8700-52 Client Side Connections, Client Side Nodes, None, default 1 second

Page 7
4.2Client Side Connections

FS-8700-52 Notifier AM6000

Driver Manual

4.2Client Side Connections

Section Title

 

 

Connections

 

 

Column Title

Function

Legal Values

Port

Specify which port the device is

P1-P8, R1-R2

 

connected to the FieldServer

 

Baud*

Specify baud rate

2400 (Only baud rate supported by

 

 

the Notifier port)

Parity*

Specify parity

Even

Data_Bits*

Specify data bits

7

 

 

 

Stop_Bits*

Specify stop bits

1

 

 

 

Protocol

Specify protocol used

AM6000

 

 

 

Handshaking*

Specify hardware handshaking

None

Poll Delay*

Time between internal polls

0-32000 seconds

 

 

default 1 second

Example

 

 

//Client Side Connections

Connections

Port, Baud, Parity, Protocol, Data_bits, Handshaking, Poll_Delay

P8, 2400, Even, AM6000, 7,

None,

0.100s

4.3Client Side Nodes

Section Title

 

 

Nodes

 

 

Column Title

Function

Legal Values

Node_Name

Provide name for node

Up to 32 alphanumeric characters

Node_ID

Modbus station address of physical

1-255

 

server node

 

Protocol

Specify protocol used

Modbus_RTU, Modbus/TCP, etc.

Port

Specify which port the device is

P1-P8, R1-R2

 

connected to the FieldServer

 

Example

 

 

//Client Side Nodes

Nodes

Node_Name, Protocol, Port

Panel1, AM6000, P8

FieldServer Technologies 1991 Tarob Court, Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042

Visit our website: www.fieldserver.com E-mail: support@fieldserver.com

Page 5

Image 7
Contents FS-8700-52 Notifier AM6000 Supplement to the FieldServer Instruction ManualAPPLICABILITY & EFFECTIVITY Effective for all systems manufactured after May 1CONFIGURING THE FIELDSERVER AS A NOTIFIER AM6000 CLIENT FS-8700-52 Notifier AM6000Driver Manual TABLE OF CONTENTS1. Notifier AM6000 Description Technologies 2. Driver Scope of Supply 2.1 Supplied by FieldServer for this driverFieldServer DESCRIPTION3. Hardware Connections Column Title 4. Configuring the FieldServer as a Notifier AM6000 Client4.1 Data Arrays Section TitleNone default 1 second4.2 Client Side Connections 4.3 Client Side Nodes4.4.1 FieldSe rver Specific Map Descriptor Parameters 4.4 Client Side Map Descriptors4.4.2 Driver Specific Map Descriptor Parameters 0.1s 4.4.3 Timing ParametersScanInterval Rate at which data is polledThe range of 4.4.4 Map Descriptor ExampleAll map descriptors for the AM6000 Notifier driver must be passive system-trbl 5. Driver Notes 5.1 Map Descriptor Keywords5.1.1 AM6000TypeID device-only5.1.3 AM6000Ackable 5.1.2 AM6000Status5.1.4 AM6000Simulation 5.2 Statistics Ignored Messages Catching Ignored Messages Message 5.3 Listing of System Trouble Messages