FieldServer FS-8700-123 instruction manual Map Descriptor Example 11 Selecting a Sub-Device/Port

Page 19

FS-8700-123 MetOne Particle Counter Serial Driver Manual

Page 19 of 26

4.15.Map Descriptor Example 11 – Selecting a Sub-Device/Port

This procedure is automatic. Support for this message is provided for testing purposes only.

The driver uses the Address parameter to learn the number of the Sub-Device or Port to be selected.

When the device responds the driver stores the Sub-Device/ Port number the Data Array element specified in the configuration.

Map_Descriptors

 

 

 

 

 

 

 

 

Map_Descriptor_Name, Data_Array_Name,

Data_Array_Offset,

Function,

Node_Name Met1_SubDev_or_Port,

Address,

Met1_Function,

Length,

Select Device,

DA_MODE_CTRL,

0,

rdbc,

MET1,

Port,

0,

SubDevice/Port

1,

 

 

 

 

 

 

 

Select,

 

Driver will send a port select message to the port specified with the address parameter.

When using this type of Map Descriptor, the driver does not send a device select message first.

Set Met1_Function = ‘SubDevice/Port Select’

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@fieldServer.com

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Applicability & Effectivity MetOne Particle CountersTable of Contents MetOne Particle Counter Serial Description FS-8700-123 MetOne Particle Counter Serial Driver Manual Hardware Connections RS-232 Port Hardware Connection Tips / HintsData Arrays/Descriptors Configuring the FieldServer as a MetOne PC Serial ClientClient Side Node Descriptors Client Side Connection DescriptionsHF CNC Timing Parameters Driver Related Map Descriptor ParametersDatimes Rdbc MET1 Datimes Wrbx MET1 Map Descriptor Example 3 Read the operating modeMap Descriptor Example 4 Start / Stop Counting Map Descriptor Example 5 Change Mode Map Descriptor Example 6 Select Device Map Descriptor Example 7 Read the Current Record Map Descriptor Example 8 Dumping the Current Record DACURRD01LBL ,0 Map Descriptor Example 10 Reading from a SubDevice/Port Map Descriptor Example 11 Selecting a Sub-Device/Port Configuring the FieldServer as a MetOne PC Serial Server Appendix A. Driver Error Messages Page FYI Appendix A.1. Driver Operating and Error StatisticsUINT32 Appendix A.2. Driver Exposed Operating and Error StatisticsPage This page Intentionally Left Blank
Top Page Image Contents