FieldServer FS-8700-123 Configuring the FieldServer as a MetOne PC Serial Client

Page 7

FS-8700-123 MetOne Particle Counter Serial Driver Manual

Page 7 of 26

4.Configuring the FieldServer as a MetOne PC Serial Client

For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” sample files provided with the FieldServer).

This section documents and describes the parameters necessary for configuring the FieldServer to communicate with a MetOne Particle Counter Serial Server.

4.1.Data Arrays/Descriptors

The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable the FieldServer for MetOne Particle Counter Serial communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the destination device addresses need to be declared in the “Client Side Nodes” section, and the data required from the Servers needs to be mapped in the “Client Side Map Descriptors” section. Details on how to do this can be found below.

Note that in the tables, * indicates an optional parameter, with the bold legal value being the default.

 

Section Title

 

 

 

 

 

Data_Arrays

 

 

 

 

 

Column Title

Function

 

Legal Values

 

Data_Array_Name

Provide name for Data Array

 

Up to 15

alphanumeric

 

 

characters

 

 

 

 

 

 

 

 

 

 

Float, Bit, UInt16, SInt16,

 

Data_Array_Format

Provide data format. Each

Data

Packed_Bit,

Byte,

 

Array can only take on one format.

Packed_Byte,

 

 

 

 

 

 

Swapped_Byte

 

 

Number of Data Objects. Must be

 

 

 

Data_Array_Length

larger than the data storage area

1-10,000

 

 

 

required by the Map Descriptors for

 

 

 

 

the data being placed in this array.

 

 

 

 

 

 

 

 

 

Example

 

 

 

 

 

 

 

 

 

 

 

// Data Arrays

 

 

 

 

 

Data_Arrays

 

 

 

 

 

Data_Array_Name,

Data_Array_Format,

Data_Array_Length

 

DA_AI_01,

UInt16,

200

 

 

DA_AO_01,

UInt16,

200

 

 

DA_DI_01,

Bit,

200

 

 

DA_DO_01,

Bit,

200

 

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@fieldServer.com

Image 7
Contents Applicability & Effectivity MetOne Particle CountersTable of Contents MetOne Particle Counter Serial Description FS-8700-123 MetOne Particle Counter Serial Driver Manual Hardware Connections RS-232 Port Hardware Connection Tips / HintsData Arrays/Descriptors Configuring the FieldServer as a MetOne PC Serial ClientClient Side Node Descriptors Client Side Connection DescriptionsHF CNC Timing Parameters Driver Related Map Descriptor ParametersDatimes Rdbc MET1 Datimes Wrbx MET1 Map Descriptor Example 3 Read the operating modeMap Descriptor Example 4 Start / Stop Counting Map Descriptor Example 5 Change Mode Map Descriptor Example 6 Select Device Map Descriptor Example 7 Read the Current Record Map Descriptor Example 8 Dumping the Current Record DACURRD01LBL ,0 Map Descriptor Example 10 Reading from a SubDevice/Port Map Descriptor Example 11 Selecting a Sub-Device/Port Configuring the FieldServer as a MetOne PC Serial Server Appendix A. Driver Error Messages Page FYI Appendix A.1. Driver Operating and Error StatisticsUINT32 Appendix A.2. Driver Exposed Operating and Error StatisticsPage This page Intentionally Left Blank