FieldServer FS-8700-123 Client Side Connection Descriptions, Client Side Node Descriptors, Hf Cnc

FS-8700-123 MetOne Particle Counter Serial Driver Manual Page 8 of 26

4.2.Client Side Connection Descriptions

Section Title
Connections
Column Title		Function			Legal Values
	Specify which port the device
Port	is	connected	to	the	P1-P8, R1-R21
	FieldServer
Protocol	Specify protocol used				MetOne
Baud*	Specify baud rate				9600 (Vendor limitation).
Parity*	Specify parity				None (Vendor limitation)
Data_Bits*	Specify data bits				8 (Vendor limitation)
Stop_Bits*	Specify stop bits				1 (Vendor limitation)
Handshaking*	Specify		hardware		RTS, RTS/CTS, None
	handshaking
Poll_Delay*	Time between internal polls				0-32000 seconds, 0.05 seconds

Example

//Client Side Connections

Connections

Port,	Protocol,	Baud,	Parity,	Handshaking,	Poll_Delay
P8,	MetOne,	9600,	None,	None,	0.100s

4.3.Client Side Node Descriptors

Section Title
Nodes
Column Title	Function		Legal Values
Node_Name	Provide name for node		Up to 32 alphanumeric characters
Node_ID	The ‘Device’ Number		1-64
Protocol	Specify protocol used		MetOne.
Connection	Specify which port the device is		P1-P8, R1-R21
	connected to the FieldServer
	Identifies for the driver the family		“237 Family”
			“2408” or “Manifold”
PLC_Type	of Particle	Counters/Manifolds	“4800”
	connected to.		“HF CNC”
Example
Nodes
Node_Name,	Node_ID,	Protocol,	PLC_Type,	Connection
PLC 1,	1,	MetOne,	237 Family,	P8

1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@fieldServer.com