FieldServer FS-8700-101 Client Side Connection Descriptors, Client Side Node Descriptors

FS-8700-101_Setra Model 370 Digital Pressure Gage Manual Page 8 of 23

4.2.Client Side Connection Descriptors

Section Title
Connections
Column Title	Function	Legal Values
Port	Specify which port the device is	P1-P8, R1-R21
	connected to the FieldServer
Protocol	Specify protocol used	Setra370
Baud*	Specify baud rate	110 – 115200, standard baud
		rates only, 2400.
Parity*	Specify parity	Even, Odd, None, Mark, Space
Data_Bits*	Specify data bits	7, 8
Stop_Bits*	Specify stop bits	1
	Specify hardware handshaking
Handshaking*	The Setra Model 370 does not support	RTS, RTS/CTS, None
	handshaking.
Poll _Delay*	Time between internal polls	0-32000 seconds, 1 second

Example

//Client Side Connections

Connections

Port,	Protocol,	Baud,	Parity,	Handshaking,	Poll_Delay
P8,	Setra370,	2400,	None,	None,	0.100s

4.3.Client Side Node Descriptors

Section Title
Nodes
Column Title	Function	Legal Values
Node_Name	Provide name for node	Up to 32 alphanumeric
		characters
Node_ID	This commonly used parameter has no meaning for this driver and may be
	omitted.
Protocol	Specify protocol used	Setra370.
Connection	Specify which port the device is connected	P1-P8, R1-R21
	to the FieldServer
Example

//Client Side Nodes

Nodes
Node_Name,	Protocol,	Connection
Gage1,	Setra370,	P8

1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com