| Page 17 of 26 |
This is the producerID.
It may be the same as the IP address of the adapter but this is not always the case.
•Note the Local Producer address. Typically it will be the same as the IP of the closest GE Ethernet port. You can override this.
•Add Ranges. Record the offset and reference for each data range in the exchange.
•Save your work.
•Close HWC.
•Stop the processor.
•Store the Hardware settings to the PLC
•Put the processor back in run mode (must be running to produce.)
A second screen image shows that this exchange actually has an additional range at offset 8.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)