|
|
|
|
| Page 20 of 26 |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| Map_Descriptors |
|
|
|
|
|
|
|
|
|
|
| Map_Descriptor_Name, | Data_Array_Name, | Data_Array_Offset, | Function, | node_name, | Length, | ge_producerId, | ge_exchangeId, | ge_data_type, | ge_offset | |
| Q1, | DATA_Q, | 0 | Passive, | 1, | 1.2.3.4, | 1, | %q, | 0 |
| |
| R1, | DATA_R, | 0 | Passive, | 1, | 1.2.3.4, | 1, | %r, | 1 |
| |
| I1, | DATA_R, | 0 | Passive, | 2, | 1.2.3.4, | 1, | %u, | 3 |
| |
| R2, | DATA_R, | 1 | Passive, | 1, | 1.2.3.4, | 1, | %r, | 5 |
| |
| I2, | DATA_R, | 2 | Passive, | 1, | 1.2.3.4, | 1, | %i, | 7 |
| |
| Q2, | DATA_R, | 1 | Passive, | 1, | 1.2.3.4, | 1, | %q, | 8 |
| |
Read the section on data types to see how many items are being transmitted. Note that the %Q, %I references are actually byte references and not bit references as they are always produced in multiples of 8 and are always byte aligned.
Must correspond to the ‘Local Producer’ in the EGD configuration. Is not necessarily the IP address of the producer port.
These offsets must correspond to the offsets in the EGD configuration.
These data types must correspond to the references in the EGD range configuration.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)