FieldServer FS-8704-12 instruction manual Create a CSV file that will consume the produced data

Page 18

FS-8704-12_GE-EGD Manual

Page 18 of 26

You will need this adapter’s IP address. It will be used as the node IP address in the CSV file.

5.3.5.Create a CSV file that will consume the produced data.

An example is shown on the following page.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

Image 18

Contents FS-8704-12 GE-EGD Ethernet Global Data Table of Contents GE-EGD Ethernet Global Data Description FS-8704-12GE-EGD ManualProvided by the Supplier of 3rd Party Equipment FieldServer Technologies DescriptionHardware Connections Section Title Configuring the FieldServer as a GE-EGD ClientData Arrays Column Title Function Legal ValuesClient Side Connection Descriptors Client Side Node DescriptorsFS-8704-12GE-EGD Manual Example Driver Specific Map Descriptor Parameters FS-8704-12GE-EGD Manual Column Title Function Legal Values Map Descriptor Example Map Descriptor Basics Map Descriptor Example a Simple Consumer Map DescriptorMap Descriptor Example Multiple Consumer Map Descriptor Server Side Node Descriptors Wrbc Timing Parameters IeeeMap Descriptor Example FS-8704-12GE-EGD ManualPage 16 FS-8704-12GE-EGD Manual Create a CSV file that will consume the produced data Byte Dataq Appendix A.2. Data Types Appendix B. Error Messages Message ActionArray Contents Element Appendix B.1. EGD-ii EGD Internal IndicationsArray Element Contents Appendix B.2. Driver StatsAppendix C.2. Produced Time Stamp Appendix C.3. Status ValuesThis page Intentionally Left Blank