FieldServer FS-8704-12 instruction manual Hardware Connections

Page 5

FS-8704-12_GE-EGD Manual

Page 5 of 26

3.Hardware Connections

The FieldServer is connected to the Site Ethernet as shown below.

Configure and connect the "GE TCP/IP Ethernet Interface Type 2" according to manufacturer’s instructions.

	N7
		Site Ethernet
			(408)-262-2299
		FIELDSERVER
			GE-EGD
		CONNECTION DIAGRAM
		BASE NAME:	DATE: 2/4/04
		FILE NAME:	BY:	MF
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA			Web:www.fieldserver.com
Tel: (408) 262-2299	Fax: (408) 262-9042	Toll_Free: 888-509-1970 email: support@fieldserver.com

Image 5

Contents

FS-8704-12 GE-EGD Ethernet Global Data Table of Contents FS-8704-12GE-EGD Manual GE-EGD Ethernet Global Data DescriptionFieldServer Technologies Description Provided by the Supplier of 3rd Party EquipmentHardware Connections Data Arrays Configuring the FieldServer as a GE-EGD ClientSection Title Column Title Function Legal ValuesFS-8704-12GE-EGD Manual Example Client Side Connection DescriptorsClient Side Node Descriptors Driver Specific Map Descriptor Parameters FS-8704-12GE-EGD Manual Column Title Function Legal Values Map Descriptor Example a Simple Consumer Map Descriptor Map Descriptor Example Map Descriptor BasicsMap Descriptor Example Multiple Consumer Map Descriptor Server Side Node Descriptors Wrbc Ieee Timing ParametersMap Descriptor Example FS-8704-12GE-EGD ManualPage 16 FS-8704-12GE-EGD Manual Create a CSV file that will consume the produced data Byte Dataq Appendix A.2. Data Types Message Action Appendix B. Error MessagesAppendix B.1. EGD-ii EGD Internal Indications Array Contents ElementAppendix B.2. Driver Stats Array Element ContentsAppendix C.3. Status Values Appendix C.2. Produced Time StampThis page Intentionally Left Blank

Related manuals

Manual 26 pages 48.5 Kb