Scsi Configuring G-SPEED Scsi ID | G-Technology 0G01868 manual

G-SPEED Product Guide

8.2 (SCSI) Configuring G-SPEED SCSI ID

To set the SCSI ID of G-SPEED select “Modify Volume Set” on the left NAV bar under “Volume Set Functions.” On the next page select the volume you wish to set the SCSI ID.

Click the “submit” button and the following screen will appear:

Select the SCSI ID you would like to assign. Check the “Confirm the Operation” box and click “Submit” to save the changes. The G-SPEED and will need to be restarted for the changes to take effect.

8.3 Initializing G-SPEED

Note: If the G-SPEED is currently configured with a RAID Set. You must delete the RAID Set before continuing. See Section 8.4 for instructions on deleting a RAID Set.

1.To create a RAID/Volume set on the G-RAID select “Quick Create” under “Function Menu” on the left navigation bar of the G-SPEED GUI. The following screen will appear:

2.Select the RAID level you’d like to use with G-SPEED.

Note: For video applications in protected mode we recommend using RAID 3. For maximum performance and capacity we recommend RAID 0. See Appendix A for details on other RAID levels supported

Note: G-SPEED with capacities over 2TB require special initialization covered next in Item 3. Skip to Item 4 if your G-SPEED is less than 2TB.

Page 10