G-Technology 0G01868 warranty Installing the Disk Drive Modules

G-SPEED Product Guide

7.2Installing the Disk Drive Modules

1.Remove the G-SPEED Bezel by pulling forward.

2.Install the six disk drive modules into the G-SPEED enclosure and secure them in place by pushing on the lever.

Note: The G-SPEED writes a signature to each drive so the drive modules can be installed in any position in the G-SPEED enclosure.

3.Replace the G-SPEED Bezel.

7.3(Fibre Channel) Installing the SFP and Optical Cable

1.Install the SFP into PORT 0 of the G-Speed. It will seat with an audible click (to remove, open the latch and pull)

2.Remove the protective plugs from the SFP and optical cable.

Page 6