Pitney Bowes 2 Follow the instructions presented on your computer screen, Install optional scale

Page 4

Set-up: Using PC

3Follow the instructions presented on your computer screen

Next, the mailstation 2™ Quick Install Software will guide you through the installation. Respond to the prompt on each screen, then click Next.

4Install optional scale

Position the scale on top of the meter as shown.

Connect the scale cable to the scale connector on the back of the mailstation 2™ at the scale icon.

Tighten the screws to ensure a secure connection.

If you want to place the scale in a different location, an optional four-foot scale cable (#978-6) can be purchased by contacting Pitney Bowes.

2

Image 4

Contents Quick Install Guide Contents 1mailstation 2 CD Installation Preparing your computerInstall optional scale Follow the instructions presented on your computer screenConnect Power Connect the Meter to the ComputerInstall Ink Cartridge Install Ink Cartridge 7Install Ink Cartridge Create a Test print Connect to Pitney Bowes Data Center 10Updating Your Software11Congratulations Your mailstation 2 is Operational Use the mailstationPage Set-up Using an Analog Phone Line 1Connect Phone CordInstall optional scale Connect PowerInstall Ink Cartridge Add ink cartridge Continue Press EnterImportant Is Ink Cartridge installed? Create a Test Print Connect to Pitney Bowes Data Center Updating Your SoftwareCongratulations Your mailstation 2 is Operational Troubleshooting Contact List Page