Pitney Bowes 2 manual Create a Test print

Page 9

Set-up: Using PC

8Create a Test print

! ATTENTION

To print correctly, insert tape or envelope against the rear and side walls.

The system will detect the envelope and automatically begin printing.

When prompted, insert a spare envelope or a tape sheet for a test print.

If the test print is poor, click Not OK to perform additional printer maintenance and print another test image.

If the test print is good, click OK.

7

Image 9

Contents Quick Install Guide Contents Preparing your computer 1mailstation 2 CD InstallationFollow the instructions presented on your computer screen Install optional scaleConnect the Meter to the Computer Connect PowerInstall Ink Cartridge Install Ink Cartridge 7Install Ink Cartridge Create a Test print 10Updating Your Software Connect to Pitney Bowes Data CenterUse the mailstation 11Congratulations Your mailstation 2 is OperationalPage 1Connect Phone Cord Set-up Using an Analog Phone LineConnect Power Install optional scaleAdd ink cartridge Continue Press Enter Install Ink CartridgeImportant Is Ink Cartridge installed? Create a Test Print Updating Your Software Connect to Pitney Bowes Data CenterCongratulations Your mailstation 2 is Operational Troubleshooting Contact List Page