Pitney Bowes 2 manual Connect the Meter to the Computer, Connect Power

Page 5

Set-up: Using PC

5Connect the Meter to the Computer

Connect the USB cable to the back of the meter. Connect the other end of the cable to the PC.

NOTE:For printing postage, the mailstation 2™ does not have to be connected to a computer. However, if you add funds frequently, we recommend you keep it connected.

6Connect Power

Plug the power cord into the unit as shown and into a convenient outlet that is not controlled by a switch or power strip.

There is no On/Off switch on your meter.

The meter takes a few moments to start up. Then the computer tells you when it can communicate with the meter.

3

Image 5

Contents Quick Install Guide Contents Preparing your computer 1mailstation 2 CD InstallationFollow the instructions presented on your computer screen Install optional scaleConnect the Meter to the Computer Connect PowerInstall Ink Cartridge Install Ink Cartridge 7Install Ink Cartridge Create a Test print 10Updating Your Software Connect to Pitney Bowes Data CenterUse the mailstation 11Congratulations Your mailstation 2 is OperationalPage 1Connect Phone Cord Set-up Using an Analog Phone LineConnect Power Install optional scaleAdd ink cartridge Continue Press Enter Install Ink CartridgeImportant Is Ink Cartridge installed? Create a Test Print Updating Your Software Connect to Pitney Bowes Data CenterCongratulations Your mailstation 2 is Operational Troubleshooting Contact List Page