Chapter 3 | |
|
|
#Voltage Monitoring:
Click <Enter> key to enter its submenu:
µGuru Utility V0.09
OC Guru | ABIT EQ |
|
|
|
|
|
| |
| Voltage Monitoring |
|
|
| High | Low | ||
|
| Reading | Shutdown Beep |
| ||||
(*)CPU Core Voltage |
| 1.550V | Enable | Enable | Limit | Limit | ||
| (*) | (*) |
| 1.89V | 1.00V | |||
(*)DDR Voltage |
| 2.70V | ( ) | (*) |
| 2.90V | 2.10V | |
(*)DDR VTT Voltage |
| 1.35V | ( ) | (*) |
| 1.55V | 1.05V | |
(*)CPU VTT 1.2V Voltage |
| 1.22V | ( ) | (*) |
| 1.45V | 0.95V | |
(*)NB 1.4V Voltage |
| 1.45V | ( ) | (*) |
| 1.70V | 1.10V | |
(*)SB 1.5V Voltage |
| 1.55V | ( ) | (*) |
| 1.80V | 0.20V | |
(*)ATX | 11.77V | ( ) | (*) |
| 3.00V | 9.60V | ||
(*)ATX | 11.71V | ( ) | (*) |
| 14.40V | 9.60V | ||
(*)ATX +5V |
| 5.03V | ( ) | (*) |
| 6.00V | 4.00V | |
(*)ATX +3.3V |
| 3.39V | ( ) | (*) |
| 3.95V | 2.65V | |
(*)ATX 5VSB |
| 5.06V | ( ) | (*) |
| 6.00V | 4.00V | |
|
|
|
|
| ||||
↑↓:Move Enter:Select |
|
|
| F10:Save ESC:Exit | ||||
All Voltages:
These items display the voltage of each element.
!Shutdown Enable:
Use <Space> key to enable system shutdown function. If the voltage of corresponding element is higher/lower than the high/low limit, the system would automatically shutdown.
!Beep Enable:
Use <Space> key to enable warning beeps function. If the voltage of corresponding element is higher/lower than the high/low limit, warning beeps will sound.
!High/Low Limit:
These items set the high and low voltage limit.
NOTE: The value of high limit must be set above the one of low limit.
NI8 SLI Series