Chapter 3 | |
|
|
Precomp:
This item displays the number of cylinders at which to change the write timing.
Landing Zone:
This item displays the number of cylinders specified as the landing zone for the read/write heads.
Sector:
This item configures the numbers of sectors per track.
#Back to Standard CMOS Features Setup Menu:
Drive A:
This item sets the type of floppy drives (usually only Drive A) installed.
Halt On:
This item determines whether the system stops if an error is detected during system
[All Errors]: The
[No Errors]: The
[All, But Keyboard]: The
[All, But Diskette]: The
[All, But Disk/Key]: The
Base Memory:
This item displays the amount of base memory installed in the system. The value of the base memory is typically 640K for system with 640K or more memory size installed on the motherboard.
Extended Memory:
This item displays the amount of extended memory detected during system
Total Memory:
This item displays the total memory available in the system.
NI8 SLI Series