Abit manual AW9D-MAX, AW9D

[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard to power on the system.

※The mouse wake up function can only be used with the PS/2 mouse, not with the COM port or USB type. Some PS/2 mice cannot wake up the system because of compatible problems. If the specs of your keyboard are too old, it may fail to power on.

-KB Power ON Password

This item sets the password required in order to power on your computer.

※Do not forget your password, or you will have to clear the CMOS and reset all parameters in order to utilize this function again.

-Hot Key Power ON

This item powers on the system by pressing <Ctrl> key plus one of each function key (<F1> ~ <F12>) simultaneously.

Restore On AC Power Loss

This item selects the system action after an AC power failure.

[Power Off]: When power returns after an AC power failure, the system’s power remains off. You must press the Power button to power-on the system.

[Power On]: When power returns after an AC power failure, the system’s power will be powered on automatically.

[Last State]: When power returns after an AC power failure, the system will return to the state where you left off before power failure occurs. If the system’s power is off when AC power failure occurs, it will remain off when power returns. If the system’s power is on when AC power failure occurs, the system will power-on when power returns.

3-28 AW9D-MAX, AW9D