Abit AW9D-MAX manual On-Chip PCI Device

[IDE-2]: “IDE1” connector served as [Secondary Master] and [Secondary Slave] channel. “SATA1” and “SATA3” connector served as [Primary Master] and [Primary Slave] channel. The remaining “SATA2” and “SATA4” connectors are disabled.

Refer to the following table for the relationships between IDE and SATA ports.

PATA IDE	IDE	IDE	IDE	IDE	IDE	IDE	IDE	IDE
	Channel	Channel	Channel	Channel	Channel	Channel	Channel	Channel
Mode
	1 Master	1 Slave	2 Master	2 Slave	3 Master	3 Slave	4 Master	4 Slave
IDE-1	IDE	IDE Slave	SATA2	SATA4	None	None	None	None
	Master
IDE-2	SATA1	SATA3	IDE	IDE Slave	None	None	None	None
			Master

※This option is configurable only when the item [On-Chip SATA] is set to [Combined Mode].

On-Chip PCI Device

Click <Enter> key to enter its submenu:

Phoenix – AwardBIOS CMOS Setup Utility

On-Chip PCI Device

On-Chip			USB	Controller	Enabled	Item Help
- USB		2.0 Controller			Enabled
-	USB	Keyboard Support Via			OS
-	USB Mouse			Support Via	OS
On-Chip			Audio Controller		Auto

↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

On-Chip USB Controller

This option enables or disables the USB controller.

-USB 2.0 Controller

This option enables or disables the USB 2.0 controller.

-USB Keyboard Support via

Select [BIOS] for the legacy operating system (such as DOS) that does not support USB keyboard.

3-22 AW9D-MAX, AW9D