Integra PLA-50V1 instruction manual Basic Operations

Page 18

Basic Operations

POWER

To turn the unit ON and OFF:

1.Plug the power cord into an active AC power outlet.

2.Press the POWER ON button (on the remote control unit) to turn on the unit.

The monitor’s POWER/STANDBY indicator will light up (green) when the unit is on.

3.Press the POWER OFF button (on the remote control unit or the unit) to turn off the unit.

The monitor’s POWER/STANDBY indicator turns red and the standby mode is set (only when turning off the unit with the remote control unit).

VOLUME

To adjust the volume:

1.Press and hold the VOLUME button (on the remote control unit or the unit) to increase to the desired level.

2.Press and hold the VOLUME button (on the remote control unit or the unit) to decrease to the desired level.

DIGITAL ZOOM

Digital zoom specifies the picture position and enlarges the picture.

1.Press the POINTER button to display the pointer. ()

To change the size of the picture:

Press the ZOOM+ button and enlarge the picture.

The pointer will change to resemble a magnifying glass. ( )

A press of the ZOOM- button will reduce the picture and return it to its original size.

To change the picture position:

Select the position with the ▲▼  buttons.

2.Press the POINTER button to delete the pointer.

AUTO ADJUST

To adjust the size or quality of the picture automatically:

Press the AUTO ADJUST button.

MUTE

To cancel the sound:

Press the MUTE button on the remote control unit to cancel the sound; press again to restore.

DISPLAY

To check the settings:

1.The screen changes each time the DISPLAY button is pressed.

2.If the button is not pressed for approximately three seconds, the menu turns off.

Information

AUTO ADJUST ON setting

When RGB (still picture) input

is selected ...... Fine Picture, Picture ADJ, Position,

and Contrast will be adjusted automatically.

When RGB (motion picture),

VIDEO, or Y/Pb/Pr (component) input

is selected ...... The screen size switches to ZOOM

mode automatically with the superimposed caption displayed fully only when the picture contains dark areas above and below the picture.

12

Image 18
Contents Page Precautions Important InformationTo avoid damage and prolong operating life Mises en garde et précautions de sécurité PrécautionsDOC avis de conformation AvertissementRemarque Contents How to Mount the Plasma Monitor Ventilation Requirements for enclosure mountingIntroduction Features you’ll enjoy includeContents of the Package Introduction to the Plasma Monitor PLA-50V1Part Names and Function Front ViewRear View/ Terminal Board RGB2/ DVD2/ HD2Remote Control Unit RGB/PCBattery Installation and Replacement 5MULTIOperating Range Using the wired remote control modeHandling the remote control unit Approx 7m/ 23ftInstallation Personal computer with a digital RGB outputConnecting Your DVD Player Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connections with Equipment that has a Digital InterfaceExternal Speaker Connections Right LeftPin Assignments and Signal Levels for 15 pin RGB Analog RGBBasic Operations After the power is turned off with the off timer To set the off timerTo cancel the off timer To check the remaining timeWide Operations When watching videos or digital video discsWhen watching high definition video source Watching with a wide screen manual Picture Size setting When Picture Size is set to OFF Supported resolution Watching computer images with a wide screenMulti Screen Operations Selecting the input signals to be displayedAdjusting the OSM controls Showing a couple of pictures on the screen at the same timeOSMOn Screen Menu Controls Menu OperationsMain menu Sub menu Functions  Picture adjustment screen Picture Settings MenuAdjusting the picture  Adjusting the computer imageExample Setting the Theater mode  Types of picture modesOnce the setting is completed Setting the color temperatureExample Setting  Setting the color temperatureExample Adjusting the White Balance  Adjusting the white balance NR Example Setting NR-3Reducing noise in the picture  Types of noise reductionExample Adjusting the bass Sound Settings MenuAdjusting the treble, bass and left/right balance  Sound settings menuExample Adjusting the vertical position in the normal mode Screen Settings MenuAdjusting the Position,Size,Fine Picture,Picture Adj When Auto Picture is OFFFunction Settings Menu Setting the on-screen displayTo adjust the position Adjusting the position of the menu displayExample Adjusting the position of the menu display Adjusting the position of the menu displayPower management function Setting the power management for computer imagesExample Turning the power management function on Power management settingsPOWER/STANDBY indicator Description Turning the picture back onCinema Mode Setting the picture to suit the movieSetting the gray level for the sides of the screen Gray LevelWhen you adjust the RGB3 ADJ Setting RGB3 ADJExample Setting PLE to Lock Reducing burn-in of the screenOrbiter Resetting to the default valuesPLE InverseSetting the BNC connectors Option Settings MenuSetting the allocation of the audio connectors Audio InputTo set the RGB select mode to Motion Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion BNC SelectRGB Select modes Setting high definition images to the suitable screen sizeExample Setting the 1080B mode to HD Select modesInformation Menu Setting the picture size for RGB input signalsExample Setting the on mode to OFF Picture SizeExample Setting the menu display to Deutsch Setting the language for the menusSetting the video signal format Language settingsVideo signal formats NtscApplication Type of connector D-Sub 9-pin maleExternal Control ConnectionsCommunication Format CommandCheck Sum CKS, Error Processing, and ACK Unit ID 1 and Unit IDCommand Reference List OSM Select Audio Mute OnAudio Mute Off Color Gain DataContrast Gain Data Input Mode RequestSharpness Gain Data Bright Gain DataRED Gain Data Green Gain DataBlue Gain Data Video ADJ Request Audio Select Request Failure Mode RequestAudio Select Set Long Life SetTable of Signals Supported Supported resolutionComputer input signals supported by this system Page Troubleshooting Symptom Checks RemedySpecifications SignalsOnkyo U.S.A. Corporation