Infinite Peripherals 216, KPM-210 user manual GS C sa sb sn sr sc, Select count mode B, Ascii GS C

3. PRINTER FUNCTIONS

GS C ; sa ; sb ; sn ; sr ; sc ;

[Name]

Select count mode (B)

(Tab.A.3)

[Format]

ASCII

GS C

;

sa

;

sb

;

sn

;

sr

;

sc ;

Hex

1D

43

3B sa

3B sb

3B sn

3B sr

3B sc 3B

Decimal

29

67

59

sa

59

sb

59

sn

59

sr

59

sc 59

[Range]

0 ≤

sa, sb, sc ≤

65535

0 ≤

sn, sr ≤ 255

These values are all character strings.

[Description]

Selects a count mode for the serial number counter and

specifies the value of the counter.

•sa, sb, sn, sr and sc are all displayed as ASCII characters using codes from ‘0’ to ‘9’.

•sa and sb specify the counter range.

•sn indicates the unit amount for counting up or down.

•sr indicates the repetition number when the counter value is fixed.

•sc indicates the counter value.

[Notes]	• Count-up mode is specified when:
	sa < sb and sn ≠ 0 and sr ≠ 0
	• Count-down mode is specified when:
	sa > sb and sn ≠ 0 and sr ≠ 0
	• Counting stops when:
	sa = sb or sn = 0 or sr = 0
	• In setting count-up mode, the minimum value of the counter
	is sa and the maximum value is sb. If counting up reaches a
	value exceeding the maximum, it resets to the minimum
	value. If the counter value set by sc is outside the counter
	operation range, the counter value is forced to convert to the
	minimum value by executing GS c.
	• In setting count-down mode, the maximum value of the
	counter is sa and the minimum value is sb. If counting down
	reaches a value less than the minimum, it resets to the maxi-
	mum value. If the counter value set by sc is outside the
	counter operation range, the counter value is forced to con-
	vert to the maximum value by executing GS c.
	• Parameters sa to sc can be omitted. If omitted, they remain
	unchanged.
	• Parameters sa to sc cannot contain characters other than ‘0’
	to ‘9’.

KPM210/216

3- 42 www.ipcprint.com