Iiyama AQU5611DTBK manual Updating the settings for your monitor, Applicable models, Procedure

Page 33

Updating the settings for your monitor

Unless you change the video graphics card that drives your monitor, there is usually no need to change the settings. In case the need does arise, a procedure for changing them is given in this appendix.

This operation must be done carefully. If incorrect parameters are specified, nothing will be displayed.

Applicable models

The procedure given in this document applies to monitors with firmware at the following levels:

DDC CPU	Version 3.2 or higher
OSD CPU	Version 5.0 or higher
USB CPU	Version 4.0 or higher
FPGA LOGIC	Version 34 or higher

Procedure

1.Setting

a.Connect the monitor to the personal computer that is to be used as a video source.

b.Turn on the monitor and the PC. Wait until the system boots and a stable screen image is displayed. Confirm that the power indicator on the monitor shows green. If it is steady amber, press ″Debug switch″ with a stick to turn on the monitor. (See the following figure).

CAUTION:

Do not use conductive material to press this switch. It may damage the electric circuit inside of the monitor.

In this case, power indicator will show blinking amber, and image from PC does not appear.

Some color pattern may appear on screen.

Appendix A. Specifications 25

Image 33

Contents AQU5611D BK First Edition July Handling To avoid shock hazardPage Considerations on the monitor resolution LCD considerationsOperating considerations Trademarks License inquiriesContents Page Before setting up PrerequisitesUnpacking Monitor Checking partsHardware setup Locations Front viewRear view Setup the monitor Storing the connector tool Remove the connector cover Connecting the power adapter cord Connecting the cablesReinstall the connector cover on the monitor Connecting the digital signal cable Connecting the power cord This completes the hardware setup Supplementary Information Adjusting the viewing angle Adjusting and maintaining your monitorMenu/Enter Setting the monitor control buttonsLeft-Arrow Right-ArrowAccessing the on-screen display OSD menus Main menuOSD Icon Description Submenus Brightness submenuVideo input submenu Information submenu 1280Knowing the operating status of your monitor Color Mode Power Description ConsumptionDisconnecting the cable Maintaining your monitor Using the security keylockSymptom list TroubleshootingSymptom Possible cause Suggested action Is something wrong?Page Service and support Warranty informationPage Appendix A. Specifications Monitor supports the following display modes Supported display modesUpdating the settings for your monitor ProcedureApplicable models 1600 Important notices Setting Applicable model Description Number Valid settingsFRU part number Part number Appendix B. Field-Replaceable Units FRUsPage Appendix C. Compliance Why do we have environmentally labelled computers?TCO’95 Congratulations What does labelling involve?TCO Development Environmental RequirementsBrominated flame retardants LeadIndustry Canada Class a Emission Compliance Statement Federal Communications Commission FCC StatementAvis de Conformité à la Réglementation d’Industrie Canada Deutsche EMV-Direktive electromagnetische VerträglichkeitUnion Européenne Directive Conformité électromagnétique European Union EMC DirectiveUnion Europea Normativa EMC Europese Unie -- EMC-richtlijnenEuropeiska Unionen EMC Direktiv Power cord part number Used in these countries or regions Statements for Other Countries Power CordHinweise