ID Tech 60, 25, 50, 30, 80, 70 user manual Retail Bar Codes, Codabar Settings Enable/Disable Codabar

Page 13

Codabar Settings:

Enable/Disable Codabar

If enabled, Codabar symbology will be read, subject to the reading restrictions specified by this set of options. If disabled, the data from the symbology will be disregarded.

F5<ENTER>A for Codabar Enable

F5<ENTER>B for Codabar Disable

Send Start/Stop Characters

Codabar uses the A, B, C, and D characters as Start and Stop characters, giving 16 unique Start/Stop character combinations. Some applications require that these characters be transmitted with the data while others specify that they must not be sent.

F5<ENTER>C to Send Start/Stop

F1<ENTER>D Do Not Send Start/Stop

Check Digit

When Check Digit is selected, the reader takes the last character in the decoded data stream as a check digit. It then calculates the correct check digit for the remaining data and compares it to the last data character. If it is the same, the data is accepted. If not, the data is rejected. With the Calculate and Send Check Digit option, the reader will send the check digit as part of the data stream. If the Calculate but not Send Check Digit option is selected, the reader will strip it from the data stream before transmission. If the Check Digit is not calculated, the reader will assume the last data character read from the symbol is part of the data stream and will not make a comparison test.

F1<ENTER>E to Not Calculate Check Digit and send whole data stream F1<ENTER>F to Calculate and Send Check Digit

F1<ENTER>G to Calculate but not send Check Digit

MSI/Plessey Settings:

Enable/Disable MSI/Plessey

If enabled, MSI/Plessey symbology will be read, subject to the reading restrictions specified by this set of options. If disabled, the data from the symbology will be disregarded.

F7<ENTER>A for MSI/Plessey Enable

F7<ENTER>B for MSI/Plessey Disable

Check Digit

The MSI/Plessey symbology requires a check digit, and can optionally have two check digits. The reader can either send the check digit(s) as part of the data, or strip it before transmission to the host.

F7<ENTER>C for Send Check Digit

F7<ENTER>D for Do Not Send Check Digit

Select only one of the following check digit schemes: F7<ENTER>E for Single Mod 10 Check Digit F7<ENTER>F for Two Mod 10 Check Digits

F7<ENTER>G for Mod 10/Mod 11 Check Digits

Retail Bar Codes

Retail bar codes are based on the Uniform Code Council product code encoding algorithms. These are commonly referred to as the UPC/EAN symbologies.

1.Enter RETAIL BAR CODE SETUP MODE by typing /E/D/FG.

2.Press <ENTER>.

3.Type the one or two-character code for the selection you wish to make.

4.Save your selection by pressing <ENTER>.

5.To review the current setting, enter GY<ENTER>.

6.Exit the group setup mode by entering GZ<ENTER>.

7.To reset the terminal type setting to default, enter GX<ENTER>.

2 0

2 1

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Omnitm Agency Approved Table of ContentsIntroduction SectionDescription Configuration InstallationBar Code Input Magnetic Stripe InputConfiguration Setup Sets Default SettingsExample Intercharacter Delay Beep VolumeTerminal Type Selection General SelectionsLanguage Interblock DelayCode/Track ID Scan VerificationBar Code Terminator Character Bar Code Message Formatting SelectionsBar Code Preamble Bar Code PostambleMagnetic Stripe Terminator Character Magnetic Stripe Formatting SelectionsMagnetic Stripe Preamble Magnetic Stripe PostambleBar Code Selections Code 39 Settings Enable/Disable CodeIndustrial Bar Codes Minimum and Maximum Length OptionsCheck Digit Interleaved 2 of 5 Settings Enable/Disable Interleaved 2Send Start/Stop Characters Fixed LengthCode 128 Setting Enable/Disable Code Industrial 2 of 5 Settings Enable/Disable Industrial 2F3ENTERA for Industrial 2 of 5 Enable F4ENTERA for Code 128 EnableMSI/Plessey Settings Enable/Disable MSI/Plessey Codabar Settings Enable/Disable CodabarRetail Bar Codes Enable/Disable UPC-E UPC Settings Enable/Disable UPC-ASend Number System Digit Send Check DigitEnable/Disable EAN-8 EAN Settings Enable/Disable EAN-13Addendum Required Add Separator SpaceG2ENTERJ for Do Not Read Two-Digit Addendum Magnetic Stripe SelectionsG2ENTERL for Do Not Read Five-Digit Addendum G2ENTERM for Addendum RequiredSend Start/Stop Sentinel Track SelectionSend Accout Number Only Code ID DefinitionResetting to Defaults Reviewing Configuration SettingsData Editing Data Fields Data Editing FunctionsAbccr Formula Sequence Data Editing FormulasCode ID Lengthmatchdivideaddsend Divide Commands Commands for Building FormulasTime Delay Data Editing General CommandsData Editing Enabled ADD Field JjenterData Flow Review Configuration JyenterClearjxenter Exit Data Editing JzenterExamples Data Editing Command ListTrack MSR Track 1 data Troubleshooting Operating ProcedureGeneral Procedures OperationScanning Configurations Keyboard Interface ProblemsAppendix a BAR Code Default SettingsCrlf Appendix B Magnetic Stripe Default SettingsUPC-A, -E UPC-A UPC-E EAN-8Appendix D Appendix C Function Code Table for AT InterfaceMagnetic Stripe Standard Data Formats LRE ID California Driver’s License Format TrackAppendix E Connector PIN-OUTSAamva Driver’s License Format Track Keyboard Port, 5 pin DIN MaleAppendix F USB/Keyboard Interface To use the ID Tech Reader Setup, follow these stepsID TECH, Inc

30, 70, 60, 80, 50 specifications

ID Tech is a leading provider of payment solutions, and their ID Tech 70, 30, 50, 25, and 60 series terminals represent the forefront of mobile and secure payment technology. Each model in this series is designed with unique features catering to various business needs, ensuring that payment processing remains seamless and efficient.

The ID Tech 70 is characterized by its robust construction and reliability, making it suitable for both retail and hospitality sectors. It supports various payment methods, including magnetic stripe, EMV chip cards, and contactless payments, ensuring a versatile solution for modern businesses. One of its standout features is the dual interface, which allows for quick transactions while enhancing security through encryption technologies.

Moving to the ID Tech 30, this model is known for its compact design and portability, making it an excellent choice for businesses on the go. Its lightweight nature does not compromise functionality, as it supports all traditional forms of payment along with NFC-enabled transactions. The integration capabilities of the ID Tech 30 are impressive, allowing businesses to easily connect to existing POS systems or mobile devices.

The ID Tech 50 is designed for a more demanding environment, with an emphasis on durability and advanced security features. It includes advanced encryption and tokenization to protect sensitive cardholder information during transactions. Additionally, its large display screen improves user interaction, and its ergonomic design ensures comfort during prolonged usage.

The ID Tech 25 is an entry-level model that offers essential functionalities at an affordable price point. It supports magnetic stripe and EMV payments, making it a solid choice for small businesses looking to upgrade their payment systems without overspending. The ID Tech 25’s simplicity allows for quick setup and ease of use, which is ideal for businesses new to digital payments.

Finally, the ID Tech 60 is a premium solution featuring advanced payment technology coupled with a larger interface for showcasing promotional content. It supports multi-currency transactions, making it perfect for businesses with international customers. Its enhanced security measures ensure protection against fraud, while the integration of loyalty programs adds further value to the customer experience.

In summary, the ID Tech series, with its 70, 30, 50, 25, and 60 models, offers a comprehensive range of payment solutions tailored to various business needs. Each terminal provides unique features and cutting-edge technologies, ensuring secure and efficient payment processing suitable for any environment. With ongoing innovations in payment technology, ID Tech remains a trusted choice for businesses aiming to stay ahead in the digital payment landscape.
Top Page Image Contents