ID Tech 80, 25, 60, 50, 30 Magnetic Stripe Selections, G2ENTERJ for Do Not Read Two-Digit Addendum

Page 16

Read Two-Digit Addendum

If enabled, the reader will decode the two-digit secondary symbol when it is scanned with the primary symbol, and add the data to the end of the transmission. If not, any two-digit secondary symbol will be ignored.

G2<ENTER>I for Read Two-Digit Addendum

G2<ENTER>J for Do Not Read Two-Digit Addendum

Read Five-Digit Addendum

This option operates in the same manner as the Read Two Digit Addendum option except it enables the reading of a five digit second- ary symbol.

G2<ENTER>K for Read Five-Digit Addendum

G2<ENTER>L for Do Not Read Five-Digit Addendum

Addendum Required

If a two or five-digit addendum is enabled, then enabling this option will require an addendum be present before a good read is registered. If not, then symbols with and without the addendum will be accepted.

G2<ENTER>M for Addendum Required

G2<ENTER>N for Addendum Not Required

Add Separator Space

This option is used with the Two and Five-Digit Addendum options. If enabled, an ASCII space character is inserted between the data de- coded from the primary UPC symbol and the addendum symbol.

G2<ENTER>O to Add Space Separator

G2<ENTER>P to Not Add Space Separator

Magnetic Stripe Selections

The Omni reader can accept and decode data read from a magnetic stripe. The parameters for reading the magnetic data can be pro- grammed independently from any of the bar code selections.

1.Enter RETAIL BAR CODE SETUP MODE by typing /E/D/FH.

2.Press <ENTER>.

3.Type the one or two-character code for the selection you wish to make.

4.Save your selection by pressing <ENTER>.

5.To review the current setting, enter HY<ENTER>.

6.Exit the group setup mode by entering HZ<ENTER>.

7.To reset the terminal type setting to default, enter HX<ENTER>.

2 6

2 7

Image 16
Contents Omnitm Table of Contents Agency ApprovedIntroduction SectionDescription Installation ConfigurationBar Code Input Magnetic Stripe InputConfiguration Setup Sets Default SettingsExample Beep Volume Intercharacter DelayTerminal Type Selection General SelectionsInterblock Delay LanguageCode/Track ID Scan VerificationBar Code Message Formatting Selections Bar Code Terminator CharacterBar Code Preamble Bar Code PostambleMagnetic Stripe Formatting Selections Magnetic Stripe Terminator CharacterMagnetic Stripe Preamble Magnetic Stripe PostambleCode 39 Settings Enable/Disable Code Bar Code SelectionsIndustrial Bar Codes Minimum and Maximum Length OptionsInterleaved 2 of 5 Settings Enable/Disable Interleaved 2 Check DigitSend Start/Stop Characters Fixed LengthIndustrial 2 of 5 Settings Enable/Disable Industrial 2 Code 128 Setting Enable/Disable CodeF3ENTERA for Industrial 2 of 5 Enable F4ENTERA for Code 128 EnableMSI/Plessey Settings Enable/Disable MSI/Plessey Codabar Settings Enable/Disable CodabarRetail Bar Codes UPC Settings Enable/Disable UPC-A Enable/Disable UPC-ESend Number System Digit Send Check DigitEAN Settings Enable/Disable EAN-13 Enable/Disable EAN-8Addendum Required Add Separator SpaceMagnetic Stripe Selections G2ENTERJ for Do Not Read Two-Digit AddendumG2ENTERL for Do Not Read Five-Digit Addendum G2ENTERM for Addendum RequiredTrack Selection Send Start/Stop SentinelSend Accout Number Only Code ID DefinitionResetting to Defaults Reviewing Configuration SettingsData Editing Data Fields Data Editing FunctionsAbccr Formula Sequence Data Editing FormulasCode ID Lengthmatchdivideaddsend Commands for Building Formulas Divide CommandsData Editing General Commands Time DelayData Editing Enabled ADD Field JjenterReview Configuration Jyenter Data FlowClearjxenter Exit Data Editing JzenterData Editing Command List ExamplesTrack MSR Track 1 data Operating Procedure TroubleshootingGeneral Procedures OperationKeyboard Interface Problems Scanning ConfigurationsAppendix a BAR Code Default SettingsCrlf Magnetic Stripe Default Settings Appendix BUPC-A, -E UPC-A UPC-E EAN-8Appendix D Appendix C Function Code Table for AT InterfaceMagnetic Stripe Standard Data Formats California Driver’s License Format Track LRE IDConnector PIN-OUTS Appendix EAamva Driver’s License Format Track Keyboard Port, 5 pin DIN MaleTo use the ID Tech Reader Setup, follow these steps Appendix F USB/Keyboard InterfaceID TECH, Inc

30, 70, 60, 80, 50 specifications

ID Tech is a leading provider of payment solutions, and their ID Tech 70, 30, 50, 25, and 60 series terminals represent the forefront of mobile and secure payment technology. Each model in this series is designed with unique features catering to various business needs, ensuring that payment processing remains seamless and efficient.

The ID Tech 70 is characterized by its robust construction and reliability, making it suitable for both retail and hospitality sectors. It supports various payment methods, including magnetic stripe, EMV chip cards, and contactless payments, ensuring a versatile solution for modern businesses. One of its standout features is the dual interface, which allows for quick transactions while enhancing security through encryption technologies.

Moving to the ID Tech 30, this model is known for its compact design and portability, making it an excellent choice for businesses on the go. Its lightweight nature does not compromise functionality, as it supports all traditional forms of payment along with NFC-enabled transactions. The integration capabilities of the ID Tech 30 are impressive, allowing businesses to easily connect to existing POS systems or mobile devices.

The ID Tech 50 is designed for a more demanding environment, with an emphasis on durability and advanced security features. It includes advanced encryption and tokenization to protect sensitive cardholder information during transactions. Additionally, its large display screen improves user interaction, and its ergonomic design ensures comfort during prolonged usage.

The ID Tech 25 is an entry-level model that offers essential functionalities at an affordable price point. It supports magnetic stripe and EMV payments, making it a solid choice for small businesses looking to upgrade their payment systems without overspending. The ID Tech 25’s simplicity allows for quick setup and ease of use, which is ideal for businesses new to digital payments.

Finally, the ID Tech 60 is a premium solution featuring advanced payment technology coupled with a larger interface for showcasing promotional content. It supports multi-currency transactions, making it perfect for businesses with international customers. Its enhanced security measures ensure protection against fraud, while the integration of loyalty programs adds further value to the customer experience.

In summary, the ID Tech series, with its 70, 30, 50, 25, and 60 models, offers a comprehensive range of payment solutions tailored to various business needs. Each terminal provides unique features and cutting-edge technologies, ensuring secure and efficient payment processing suitable for any environment. With ongoing innovations in payment technology, ID Tech remains a trusted choice for businesses aiming to stay ahead in the digital payment landscape.