ID Tech 50, 25 UPC Settings Enable/Disable UPC-A, Enable/Disable UPC-E, Send Number System Digit

Page 14

UPC Settings:

Enable/Disable UPC-A

UPC-A is a fixed format symbology and there are no variations allowed. If enabled, UPC-A symbology will be read, subject to the reading restrictions specified by this set of options. If disabled, the data from the symbology will be disregarded.

G1<ENTER>A for UPC-A Enable

G1<ENTER>B for UPC-A Disable

Enable/Disable UPC-E

UPC-E is a special version of the UPC-A specification. It is a fixed format symbology and there are no variations allowed. If disabled, the data from the symbology will be disregarded.

G1<ENTER>C for UPC-A Enable

G1<ENTER>D for UPC-A Disable

Send Number System Digit

The first encoded digit in the UPC-A symbol is the number system digit. If enabled, the first digit of the transmitted data stream is the number system digit followed by the manufacturer’s number. If dis- abled, then the first digit transmitted is part of the manufacturer’s number.

G1<ENTER>E for Send Number Digit

G1<ENTER>F for Do Not Send Number Digit

Send Check Digit

The check digit is mandatory in the UPC symbology. If enabled, the reader will send the decoded check digit as the last character in the data stream transmitted. If not, the check character will be suppressed before transmission.

G1<ENTER>G for Send Check Digit

G1<ENTER>H for Do Not Send Check Digit

UPC-E Expansion:

The UPC-E symbology uses a special algorithm to suppress zeros in the encoded data. The suppressed information can be restored by either the Omni reader or the host system. If enabled, the reader will restore the data to its original format. If the host system is set up to do the expansion, then this option should not be used.

G1<ENTER>I for Expand UPC-E

G1<ENTER>J for Do Not Expand UPC-E

Read Two-Digit Addendum

If enabled, the reader will decode the two-digit secondary symbol when it is scanned with the primary symbol, and add the data to the end of the transmission. If not, any two-digit secondary symbol will be ignored.

G1<ENTER>K for Read Two-Digit Addendum

G1<ENTER>L for Do Not Read Two-Digit Addendum

Read Five-Digit Addendum

This option operates in the same manner as the Read Two Digit Addendum option except it enables the reading of a five digit second- ary symbol.

G1<ENTER>M for Read Five-Digit Addendum

G1<ENTER>N for Do Not Read Five-Digit Addendum

2 2

2 3

Image 14
Contents Omnitm Table of Contents Agency ApprovedDescription SectionIntroduction Bar Code Input InstallationConfiguration Magnetic Stripe InputExample Default SettingsConfiguration Setup Sets Terminal Type Selection Beep VolumeIntercharacter Delay General SelectionsCode/Track ID Interblock DelayLanguage Scan VerificationBar Code Preamble Bar Code Message Formatting SelectionsBar Code Terminator Character Bar Code PostambleMagnetic Stripe Preamble Magnetic Stripe Formatting SelectionsMagnetic Stripe Terminator Character Magnetic Stripe PostambleIndustrial Bar Codes Code 39 Settings Enable/Disable CodeBar Code Selections Minimum and Maximum Length OptionsSend Start/Stop Characters Interleaved 2 of 5 Settings Enable/Disable Interleaved 2Check Digit Fixed LengthF3ENTERA for Industrial 2 of 5 Enable Industrial 2 of 5 Settings Enable/Disable Industrial 2Code 128 Setting Enable/Disable Code F4ENTERA for Code 128 EnableRetail Bar Codes Codabar Settings Enable/Disable CodabarMSI/Plessey Settings Enable/Disable MSI/Plessey Send Number System Digit UPC Settings Enable/Disable UPC-AEnable/Disable UPC-E Send Check DigitAddendum Required EAN Settings Enable/Disable EAN-13Enable/Disable EAN-8 Add Separator SpaceG2ENTERL for Do Not Read Five-Digit Addendum Magnetic Stripe SelectionsG2ENTERJ for Do Not Read Two-Digit Addendum G2ENTERM for Addendum RequiredSend Accout Number Only Track SelectionSend Start/Stop Sentinel Code ID DefinitionData Editing Reviewing Configuration SettingsResetting to Defaults Abccr Data Editing FunctionsData Fields Code ID Lengthmatchdivideaddsend Data Editing FormulasFormula Sequence Commands for Building Formulas Divide CommandsData Editing Enabled Data Editing General CommandsTime Delay ADD Field JjenterClearjxenter Review Configuration JyenterData Flow Exit Data Editing JzenterData Editing Command List ExamplesTrack MSR Track 1 data General Procedures Operating ProcedureTroubleshooting OperationKeyboard Interface Problems Scanning ConfigurationsCrlf BAR Code Default SettingsAppendix a UPC-A, -E Magnetic Stripe Default SettingsAppendix B UPC-A UPC-E EAN-8Magnetic Stripe Standard Data Formats Appendix C Function Code Table for AT InterfaceAppendix D California Driver’s License Format Track LRE IDAamva Driver’s License Format Track Connector PIN-OUTSAppendix E Keyboard Port, 5 pin DIN MaleTo use the ID Tech Reader Setup, follow these steps Appendix F USB/Keyboard InterfaceID TECH, Inc

30, 70, 60, 80, 50 specifications

ID Tech is a leading provider of payment solutions, and their ID Tech 70, 30, 50, 25, and 60 series terminals represent the forefront of mobile and secure payment technology. Each model in this series is designed with unique features catering to various business needs, ensuring that payment processing remains seamless and efficient.

The ID Tech 70 is characterized by its robust construction and reliability, making it suitable for both retail and hospitality sectors. It supports various payment methods, including magnetic stripe, EMV chip cards, and contactless payments, ensuring a versatile solution for modern businesses. One of its standout features is the dual interface, which allows for quick transactions while enhancing security through encryption technologies.

Moving to the ID Tech 30, this model is known for its compact design and portability, making it an excellent choice for businesses on the go. Its lightweight nature does not compromise functionality, as it supports all traditional forms of payment along with NFC-enabled transactions. The integration capabilities of the ID Tech 30 are impressive, allowing businesses to easily connect to existing POS systems or mobile devices.

The ID Tech 50 is designed for a more demanding environment, with an emphasis on durability and advanced security features. It includes advanced encryption and tokenization to protect sensitive cardholder information during transactions. Additionally, its large display screen improves user interaction, and its ergonomic design ensures comfort during prolonged usage.

The ID Tech 25 is an entry-level model that offers essential functionalities at an affordable price point. It supports magnetic stripe and EMV payments, making it a solid choice for small businesses looking to upgrade their payment systems without overspending. The ID Tech 25’s simplicity allows for quick setup and ease of use, which is ideal for businesses new to digital payments.

Finally, the ID Tech 60 is a premium solution featuring advanced payment technology coupled with a larger interface for showcasing promotional content. It supports multi-currency transactions, making it perfect for businesses with international customers. Its enhanced security measures ensure protection against fraud, while the integration of loyalty programs adds further value to the customer experience.

In summary, the ID Tech series, with its 70, 30, 50, 25, and 60 models, offers a comprehensive range of payment solutions tailored to various business needs. Each terminal provides unique features and cutting-edge technologies, ensuring secure and efficient payment processing suitable for any environment. With ongoing innovations in payment technology, ID Tech remains a trusted choice for businesses aiming to stay ahead in the digital payment landscape.