ID Tech 30, 25, 60, 50, 80, 70 user manual Keyboard Interface Problems, Scanning Configurations

Page 27

Keyboard Interface Problems

Installation of the reader is generally trouble free, but there are some things to watch for if you are experiencing problems.

Do you have the proper cable?

Most modern computers and terminals use a PC/XT/AT-compatible keyboard. However, the cable connecting it to the keyboard port may have variations in either the signal pins or the connector itself. Make sure that you have the proper cable for the computer/terminal with which you are interfacing.

Does the keyboard work?

Since the data from the keyboard must pass through the reader, the cabling connections are correct if the keyboard is operational.

Can the host computer accept the data fast enough?

Some computers and terminals are expecting the data rate from the keyboard port to come in at a keystroke rate, and might not be able to accept it as fast as the reader is transmitting. Try adjusting the intercharacter delay to simulate the effects of keystroke delays.

Does the keyboard port supply enough power?

Most computers supply enough power to the keyboard port to operate the reader. Occasionally you will find keyboard ports that supply only a very limited amount of power. See if the LED is lighting at full intensity;

alighter-than-usual green (or a red showing as orange) could indicate a “low power” condition.

Scanning Configurations

One common problem is incorrect configuration setup. You may be trying to read a bar code with the check digit enabled, but the bar code was printed without it. The default settings for the reader are the most frequently-used parameters. If these work, use them. That way, when someone inadvertently changes the settings, they can be reset by entering the return to default codes. If you must use different settings, it is advisable to make a master sheet with the desired configuration keystrokes in the proper order. The operator can then enter the sequen- tial order to return to the original configuration.

Is the proper bar code symbology enabled?

Each symbology is individually enabled or disabled. It is sometimes desirable to enable only those that will be used, thereby eliminating any errors due to the operator scanning the wrong bar code symbol.

Does the selected symbology format options match the symbol?

The scanned data from each bar code symbology can be restricted to eliminate the scanning of unwanted symbols. The restrictions are individually set for each symbology.

4 8

4 9

Image 27
Contents Omnitm Agency Approved Table of ContentsSection IntroductionDescription Magnetic Stripe Input InstallationConfiguration Bar Code InputDefault Settings Configuration Setup SetsExample General Selections Beep VolumeIntercharacter Delay Terminal Type SelectionScan Verification Interblock DelayLanguage Code/Track IDBar Code Postamble Bar Code Message Formatting SelectionsBar Code Terminator Character Bar Code PreambleMagnetic Stripe Postamble Magnetic Stripe Formatting SelectionsMagnetic Stripe Terminator Character Magnetic Stripe PreambleMinimum and Maximum Length Options Code 39 Settings Enable/Disable CodeBar Code Selections Industrial Bar CodesFixed Length Interleaved 2 of 5 Settings Enable/Disable Interleaved 2Check Digit Send Start/Stop CharactersF4ENTERA for Code 128 Enable Industrial 2 of 5 Settings Enable/Disable Industrial 2Code 128 Setting Enable/Disable Code F3ENTERA for Industrial 2 of 5 EnableCodabar Settings Enable/Disable Codabar MSI/Plessey Settings Enable/Disable MSI/PlesseyRetail Bar Codes Send Check Digit UPC Settings Enable/Disable UPC-AEnable/Disable UPC-E Send Number System DigitAdd Separator Space EAN Settings Enable/Disable EAN-13Enable/Disable EAN-8 Addendum RequiredG2ENTERM for Addendum Required Magnetic Stripe SelectionsG2ENTERJ for Do Not Read Two-Digit Addendum G2ENTERL for Do Not Read Five-Digit AddendumCode ID Definition Track SelectionSend Start/Stop Sentinel Send Accout Number OnlyReviewing Configuration Settings Resetting to DefaultsData Editing Data Editing Functions Data FieldsAbccr Data Editing Formulas Formula SequenceCode ID Lengthmatchdivideaddsend Divide Commands Commands for Building FormulasADD Field Jjenter Data Editing General CommandsTime Delay Data Editing EnabledExit Data Editing Jzenter Review Configuration JyenterData Flow ClearjxenterExamples Data Editing Command ListTrack MSR Track 1 data Operation Operating ProcedureTroubleshooting General ProceduresScanning Configurations Keyboard Interface ProblemsBAR Code Default Settings Appendix aCrlf UPC-A UPC-E EAN-8 Magnetic Stripe Default SettingsAppendix B UPC-A, -EAppendix C Function Code Table for AT Interface Appendix DMagnetic Stripe Standard Data Formats LRE ID California Driver’s License Format TrackKeyboard Port, 5 pin DIN Male Connector PIN-OUTSAppendix E Aamva Driver’s License Format TrackAppendix F USB/Keyboard Interface To use the ID Tech Reader Setup, follow these stepsID TECH, Inc

30, 70, 60, 80, 50 specifications

ID Tech is a leading provider of payment solutions, and their ID Tech 70, 30, 50, 25, and 60 series terminals represent the forefront of mobile and secure payment technology. Each model in this series is designed with unique features catering to various business needs, ensuring that payment processing remains seamless and efficient.

The ID Tech 70 is characterized by its robust construction and reliability, making it suitable for both retail and hospitality sectors. It supports various payment methods, including magnetic stripe, EMV chip cards, and contactless payments, ensuring a versatile solution for modern businesses. One of its standout features is the dual interface, which allows for quick transactions while enhancing security through encryption technologies.

Moving to the ID Tech 30, this model is known for its compact design and portability, making it an excellent choice for businesses on the go. Its lightweight nature does not compromise functionality, as it supports all traditional forms of payment along with NFC-enabled transactions. The integration capabilities of the ID Tech 30 are impressive, allowing businesses to easily connect to existing POS systems or mobile devices.

The ID Tech 50 is designed for a more demanding environment, with an emphasis on durability and advanced security features. It includes advanced encryption and tokenization to protect sensitive cardholder information during transactions. Additionally, its large display screen improves user interaction, and its ergonomic design ensures comfort during prolonged usage.

The ID Tech 25 is an entry-level model that offers essential functionalities at an affordable price point. It supports magnetic stripe and EMV payments, making it a solid choice for small businesses looking to upgrade their payment systems without overspending. The ID Tech 25’s simplicity allows for quick setup and ease of use, which is ideal for businesses new to digital payments.

Finally, the ID Tech 60 is a premium solution featuring advanced payment technology coupled with a larger interface for showcasing promotional content. It supports multi-currency transactions, making it perfect for businesses with international customers. Its enhanced security measures ensure protection against fraud, while the integration of loyalty programs adds further value to the customer experience.

In summary, the ID Tech series, with its 70, 30, 50, 25, and 60 models, offers a comprehensive range of payment solutions tailored to various business needs. Each terminal provides unique features and cutting-edge technologies, ensuring secure and efficient payment processing suitable for any environment. With ongoing innovations in payment technology, ID Tech remains a trusted choice for businesses aiming to stay ahead in the digital payment landscape.