ID Tech 30, 25, 60, 50, 80, 70 user manual Commands for Building Formulas, Divide Commands

Page 21

Commands for Building Formulas

The following commands are invoked, followed by the appropriate value entry.

CODE ID

JC<ENTER>

This command identifies the bar code symbologies or magnetic stripe tracks that will be accepted as valid. Enter the desired Code ID character(s) from the Code ID definition table on page XX after enter- ing JC and <ENTER>. The reader will then limit data input to those symbologies and tracks specified.

SET LENGTH JD<ENTER>n<ENTER>n<ENTER>m<ENTER>m

This command sets the upper and lower limits on the number of characters that will be accepted as valid data. The value of nn (first two digits) sets the minimum length and the value of mm the maximum length. Two digits must be entered for nn and mm so that the reader can correctly parse the command, so if you want the minimum length to be two characters, you must enter a value of “02” for nn. This command is optional.

MATCH STRING

JE<ENTER>n<ENTER>n<ENTER>[STRING TO

MATCH]<ENTER>

This command allows you to “match” any subset of characters (up to a maximum of 60) contained in the scanned input data. The value of nn (first two digits) specifies the position in the input data record that the match is to start. The value of “string” can be any combination of characters (including control and function codes) that can be entered from the ASCII table in Appendix B. Two digits must be entered for nn so that the reader can correctly parse the command, so if you want the match to begin at position 2, you must enter a value of “02” for nn). If you need to match more than one character string, simply add another MATCH command to the formula. This command is optional.

Note: The first position is 01, not 00.

Divide Commands:

These commands are used to divide the data record into separate fields for processing by the data editing program. A DIVIDE command is required in each formula. There are two methods that can be used to divide the record.

1. COUNT

JF<ENTER>n<ENTER>n<ENTER>

If you enter the COUNT command followed by two numeric digits, you will create one output field, starting at the first position in the input record, that is nn digits long. The dividing pointer will be moved to position nn+1 in the input record. Two digits must be entered for nn so that the reader can correctly parse the command, so if you want to move the dividing pointer two positions to the right, you must enter a value of “02” for nn).

2. SEARCH STRING

JG<ENTER>[CHARACTER STRING]

If you enter the SEARCH command followed by any character string, the program will search the input data record for a matching string. If a successful match is found, two output fields will be created. The first output field starts at the current position of the dividing pointer and ends at the beginning of the character string. The second field consists of the “matched” string, and the divide pointer is moved to the end of the matched string.

3 6

3 7

Image 21
Contents Omnitm Agency Approved Table of ContentsSection IntroductionDescription Configuration InstallationBar Code Input Magnetic Stripe InputDefault Settings Configuration Setup SetsExample Intercharacter Delay Beep VolumeTerminal Type Selection General SelectionsLanguage Interblock DelayCode/Track ID Scan VerificationBar Code Terminator Character Bar Code Message Formatting SelectionsBar Code Preamble Bar Code PostambleMagnetic Stripe Terminator Character Magnetic Stripe Formatting SelectionsMagnetic Stripe Preamble Magnetic Stripe PostambleBar Code Selections Code 39 Settings Enable/Disable CodeIndustrial Bar Codes Minimum and Maximum Length OptionsCheck Digit Interleaved 2 of 5 Settings Enable/Disable Interleaved 2Send Start/Stop Characters Fixed LengthCode 128 Setting Enable/Disable Code Industrial 2 of 5 Settings Enable/Disable Industrial 2F3ENTERA for Industrial 2 of 5 Enable F4ENTERA for Code 128 EnableCodabar Settings Enable/Disable Codabar MSI/Plessey Settings Enable/Disable MSI/PlesseyRetail Bar Codes Enable/Disable UPC-E UPC Settings Enable/Disable UPC-ASend Number System Digit Send Check DigitEnable/Disable EAN-8 EAN Settings Enable/Disable EAN-13Addendum Required Add Separator SpaceG2ENTERJ for Do Not Read Two-Digit Addendum Magnetic Stripe SelectionsG2ENTERL for Do Not Read Five-Digit Addendum G2ENTERM for Addendum RequiredSend Start/Stop Sentinel Track SelectionSend Accout Number Only Code ID DefinitionReviewing Configuration Settings Resetting to DefaultsData Editing Data Editing Functions Data FieldsAbccr Data Editing Formulas Formula SequenceCode ID Lengthmatchdivideaddsend Divide Commands Commands for Building FormulasTime Delay Data Editing General CommandsData Editing Enabled ADD Field JjenterData Flow Review Configuration JyenterClearjxenter Exit Data Editing JzenterExamples Data Editing Command ListTrack MSR Track 1 data Troubleshooting Operating ProcedureGeneral Procedures OperationScanning Configurations Keyboard Interface ProblemsBAR Code Default Settings Appendix aCrlf Appendix B Magnetic Stripe Default SettingsUPC-A, -E UPC-A UPC-E EAN-8Appendix C Function Code Table for AT Interface Appendix DMagnetic Stripe Standard Data Formats LRE ID California Driver’s License Format TrackAppendix E Connector PIN-OUTSAamva Driver’s License Format Track Keyboard Port, 5 pin DIN MaleAppendix F USB/Keyboard Interface To use the ID Tech Reader Setup, follow these stepsID TECH, Inc

30, 70, 60, 80, 50 specifications

ID Tech is a leading provider of payment solutions, and their ID Tech 70, 30, 50, 25, and 60 series terminals represent the forefront of mobile and secure payment technology. Each model in this series is designed with unique features catering to various business needs, ensuring that payment processing remains seamless and efficient.

The ID Tech 70 is characterized by its robust construction and reliability, making it suitable for both retail and hospitality sectors. It supports various payment methods, including magnetic stripe, EMV chip cards, and contactless payments, ensuring a versatile solution for modern businesses. One of its standout features is the dual interface, which allows for quick transactions while enhancing security through encryption technologies.

Moving to the ID Tech 30, this model is known for its compact design and portability, making it an excellent choice for businesses on the go. Its lightweight nature does not compromise functionality, as it supports all traditional forms of payment along with NFC-enabled transactions. The integration capabilities of the ID Tech 30 are impressive, allowing businesses to easily connect to existing POS systems or mobile devices.

The ID Tech 50 is designed for a more demanding environment, with an emphasis on durability and advanced security features. It includes advanced encryption and tokenization to protect sensitive cardholder information during transactions. Additionally, its large display screen improves user interaction, and its ergonomic design ensures comfort during prolonged usage.

The ID Tech 25 is an entry-level model that offers essential functionalities at an affordable price point. It supports magnetic stripe and EMV payments, making it a solid choice for small businesses looking to upgrade their payment systems without overspending. The ID Tech 25’s simplicity allows for quick setup and ease of use, which is ideal for businesses new to digital payments.

Finally, the ID Tech 60 is a premium solution featuring advanced payment technology coupled with a larger interface for showcasing promotional content. It supports multi-currency transactions, making it perfect for businesses with international customers. Its enhanced security measures ensure protection against fraud, while the integration of loyalty programs adds further value to the customer experience.

In summary, the ID Tech series, with its 70, 30, 50, 25, and 60 models, offers a comprehensive range of payment solutions tailored to various business needs. Each terminal provides unique features and cutting-edge technologies, ensuring secure and efficient payment processing suitable for any environment. With ongoing innovations in payment technology, ID Tech remains a trusted choice for businesses aiming to stay ahead in the digital payment landscape.