NDC comm NWH2610, NWH6210 manual Upgrade Firmware

Page 47

Upgrade Firmware

Upgrade Firmware

The WWB’s or WEC’s embedded software (firmware) is burned into the flash ROM. However, an updated firmware can be installed over your LAN via the IWMS program. Click on Upgrade Firmware. The Upgrade Firmware dialog box will open (Figure 29).

Use the Browse button to choose the file to be uploaded to the WWB or WEC, or type the file name and path in the Select File field.

Figure 29. Upgrade Firmware

The Upgrade button will then become enabled. Click Upgrade to start uploading the file to the WWB. The IWMS and the WWB’s (or WEC’s) built-in Trivial File Transfer Protocol (TFTP) command will upload the new executable into the WWB’s or WEC’s flash memory area. If the upload activity fails, an error message will be shown on the message box. When the file transfer is complete, click Close to close the window.

InstantWave 11Mbps WWB/WEC 47

Image 47

Contents NDC World Wide Web User’s GuideNational Datacomm Corporation Technical SupportTrademarks NWH2610 package should contain the following items Packing ListNWH6210 package should contain the following items Table of Contents Upgrade Firmware EW /E DIT /D Elete a H OST a Ddress List of FiguresIntroduction InstantWave Wireless LAN Products InstantWave 11Mbps WWB/WEC Automatic Discovery of InstantWave Products Windows 2000/XP Windows 95/98Windows NT System Requirements for the InstantWave Management System Regulatory Domain Terminology Used in this GuideDomain Name/SSID RoamingWEP How to Use this Guide Plan the wireless network Infrastructure Network Types Access PointWireless Computer-1 Computer-2 With WEC Plan the NetworkSingle AP Network Multiple AP Network Planning WWB and WEC for your wireless networkComplex Infrastructure network Planning an Infrastructure Network Single AP InstallationMultiple AP Installation Roaming InstantWave 11Mbps WWB/WEC Color Function NWH6210 Panels and ConnectorsLED Indicators NWH6210 Hardware DescriptionConnector Function ConnectorsNWH2610 Panels LED Indicators NWH2610Install the InstantWave Management System Hardware Pre-ConfigurationHosts View Using the InstantWave Management SystemAuto-Discovery Auto-DiscoveryPopup Menu Dhcp Configuration ConfigurationDhcp Filter Static IP ConfigurationConfiguration/Filter Configuration/Wireless Setting Wireless SettingMode AuthenticationName Ssid DomainEthernet/Fixed Address EthernetEthernet/Idle Time Idle TimeEncryption Configuration/EncryptionInstantWave 11Mbps WWB/WEC Configuration/SNMP Access Control Snmp Access ControlNew/Edit Address Trap Server Configuration/Trap ServerSummary Information MonitorMonitor/Summary Wireless StatisticsMonitor/Statistics Upgrade Firmware Upgrade FirmwareLoad Default ResetPartition the network according to the physical location Advanced SettingBatch mode operation Manage the Iwms Host TableCreate a Host Table via Automatic Discovery New/Edit/Delete a Host Address on the Host Table Import Host Table to check device’s availabilityImport the Configuration Profile from a File Export a Configuration profile to a FileImport the Configuration Profile from a File Mounting the WWB InstantWave Product Placement GuidelinesHardware InstantWave 11Mbps WWB/WEC Symptom Suggested Solutions TroubleshootingInstantWave 11Mbps WWB/WEC Support from Your Network Supplier Technical SupportHardware NDC Limited WarrantyLimited Warranty Service Procedures Services after Warranty Period Specifications Receiver Firmware UpgradeTemperature TransmitterMHz AppendixChannel Center Spain France Japan Number FrequencyMAC ID IndexWEP