NDC comm NWH2610, NWH6210 manual InstantWave 11Mbps WWB/WEC

Page 57

The WWB powers up,	Make sure:
but the Ethernet Link	1.	The Ethernet cable is connected firmly to both the
LED is OFF (no		WWB and Hub/Switch.
connection to an
Ethernet network).	2.	The Hub/Switch is powered on.

The Status LED on the	Restart (power cycle) the WWB and check the Status
WWB panel is Red and	LED again.		If it is still flashing, you need to return
flashing.	the WWB to the reseller for repair.

Transmission	1.	Move your WWB closer to the AP to find a better
performance is slow or		signal.	If the signal is still weak, change the
erratic.		direction of the antenna slightly.
	2.	There may be interference, possibly caused by a
		microwave oven, 2.4GHz wireless phone, or metal
		objects. Move these interference sources or
		change the location of the wireless PC or AP.
	3.	Change the wireless channel on the AP.
	4.	Check the WWB antenna, connectors, and cabling
		are firmly connected

The AP and WWB are	1.	The AP’s MAC access control function is enabled
working, but the PC		and the WWB is denied access.
cannot connect to the	2.	The Protocol Filter has blocked required protocols,
Ethernet network via the		e.g. TCP/IP to the PC.		Uncheck these protocols
AP.		from the filtering list.		See Figure 16, page 34.
	3.	The IP settings on the PC are not correct.

InstantWave 11Mbps WWB/WEC 57

Image 57

Contents National Datacomm Corporation User’s GuideTechnical Support NDC World Wide WebTrademarks Packing List NWH6210 package should contain the following itemsNWH2610 package should contain the following items Table of Contents Upgrade Firmware EW /E DIT /D Elete a H OST a Ddress List of FiguresIntroduction InstantWave Wireless LAN Products InstantWave 11Mbps WWB/WEC Automatic Discovery of InstantWave Products Windows 95/98 Windows NTWindows 2000/XP System Requirements for the InstantWave Management System Domain Name/SSID Terminology Used in this GuideRoaming Regulatory DomainWEP How to Use this Guide Plan the wireless network Wireless Computer-1 Computer-2 With WEC Access PointPlan the Network Infrastructure Network TypesSingle AP Network Multiple AP Network Planning WWB and WEC for your wireless networkComplex Infrastructure network Single AP Installation Multiple AP InstallationPlanning an Infrastructure Network Roaming InstantWave 11Mbps WWB/WEC LED Indicators NWH6210 NWH6210 Panels and ConnectorsHardware Description Color FunctionConnector Function ConnectorsNWH2610 Panels LED Indicators NWH2610Install the InstantWave Management System Hardware Pre-ConfigurationHosts View Using the InstantWave Management SystemAuto-Discovery Auto-DiscoveryPopup Menu Dhcp Configuration ConfigurationDhcp Filter Static IP ConfigurationConfiguration/Filter Configuration/Wireless Setting Wireless SettingName AuthenticationSsid Domain ModeEthernet/Fixed Address EthernetEthernet/Idle Time Idle TimeEncryption Configuration/EncryptionInstantWave 11Mbps WWB/WEC Configuration/SNMP Access Control Snmp Access ControlNew/Edit Address Trap Server Configuration/Trap ServerSummary Information MonitorMonitor/Summary Wireless StatisticsMonitor/Statistics Upgrade Firmware Upgrade FirmwareLoad Default ResetBatch mode operation Advanced SettingManage the Iwms Host Table Partition the network according to the physical locationCreate a Host Table via Automatic Discovery New/Edit/Delete a Host Address on the Host Table Import Host Table to check device’s availabilityImport the Configuration Profile from a File Export a Configuration profile to a FileImport the Configuration Profile from a File InstantWave Product Placement Guidelines HardwareMounting the WWB InstantWave 11Mbps WWB/WEC Symptom Suggested Solutions TroubleshootingInstantWave 11Mbps WWB/WEC Support from Your Network Supplier Technical SupportHardware NDC Limited WarrantyLimited Warranty Service Procedures Services after Warranty Period Specifications Temperature Firmware UpgradeTransmitter ReceiverChannel Center AppendixSpain France Japan Number Frequency MHzMAC ID IndexWEP