NDC comm NWH6210, NWH2610 manual Dhcp

Page 32

If you assign a fixed IP address to an NWH6110, make sure that all WWBs (or

WECs) within the same network have the same TCP/IP subnet address.

Obtain IP from	Automatically retrieves an IP address to the WWB (or
DHCP	WEC) from a Dynamic Host Configuration Protocol
	(DHCP) server.
	This option is enabled by default
IP Address	Manually assigns an IP address to the WWB (or WEC)
Subnet Mask	Manually assigns a subnet mask to the WWB (or WEC)
Default Gateway	Specifies the default gateway IP address (if required)

Note: A WWB (or WEC) will directly transfer SNMP respond packets

(confirmation packets) to an IWMS PC if it is within the same LAN (the

same subnet mask). If an SNMP respond packet from a WWB (or WEC) is

destined for an IWMS PC on another LAN, then the SNMP respond packet

needs to go through a router-gateway. The default gateway is the path to

that router. If you set the correct default gateway, then you can use an

IWMS manager (i.e. a PC running IWMS) physically located in a different

subnet to manage this WWB (or WEC).

If you wish to change the defaults, set each WWB (or WEC) to its new IP address

before introducing it to the open network. All WWBs (or WECs) within the same

network must have the same TCP/IP subnet address.

InstantWave 11Mbps WWB/WEC 32

Image 32

Contents User’s Guide National Datacomm CorporationTechnical Support NDC World Wide WebTrademarks NWH2610 package should contain the following items Packing ListNWH6210 package should contain the following items Table of Contents Upgrade Firmware List of Figures EW /E DIT /D Elete a H OST a DdressIntroduction InstantWave Wireless LAN Products InstantWave 11Mbps WWB/WEC Automatic Discovery of InstantWave Products Windows 2000/XP Windows 95/98Windows NT System Requirements for the InstantWave Management System Terminology Used in this Guide Domain Name/SSIDRoaming Regulatory DomainWEP How to Use this Guide Plan the wireless network Access Point Wireless Computer-1 Computer-2 With WECPlan the Network Infrastructure Network TypesSingle AP Network Planning WWB and WEC for your wireless network Multiple AP NetworkComplex Infrastructure network Planning an Infrastructure Network Single AP InstallationMultiple AP Installation Roaming InstantWave 11Mbps WWB/WEC NWH6210 Panels and Connectors LED Indicators NWH6210Hardware Description Color FunctionConnectors Connector FunctionLED Indicators NWH2610 NWH2610 PanelsHardware Pre-Configuration Install the InstantWave Management SystemUsing the InstantWave Management System Hosts View Auto-Discovery Auto-DiscoveryPopup Menu Configuration Dhcp ConfigurationDhcp Static IP Configuration FilterConfiguration/Filter Wireless Setting Configuration/Wireless SettingAuthentication NameSsid Domain ModeEthernet Ethernet/Fixed AddressIdle Time Ethernet/Idle TimeConfiguration/Encryption EncryptionInstantWave 11Mbps WWB/WEC Snmp Access Control Configuration/SNMP Access ControlNew/Edit Address Configuration/Trap Server Trap ServerMonitor Summary InformationWireless Statistics Monitor/SummaryMonitor/Statistics Upgrade Firmware Upgrade FirmwareReset Load DefaultAdvanced Setting Batch mode operationManage the Iwms Host Table Partition the network according to the physical locationCreate a Host Table via Automatic Discovery Import Host Table to check device’s availability New/Edit/Delete a Host Address on the Host TableExport a Configuration profile to a File Import the Configuration Profile from a FileImport the Configuration Profile from a File Mounting the WWB InstantWave Product Placement GuidelinesHardware InstantWave 11Mbps WWB/WEC Troubleshooting Symptom Suggested SolutionsInstantWave 11Mbps WWB/WEC Technical Support Support from Your Network SupplierNDC Limited Warranty HardwareLimited Warranty Service Procedures Services after Warranty Period Specifications Firmware Upgrade TemperatureTransmitter ReceiverAppendix Channel CenterSpain France Japan Number Frequency MHzIndex MAC IDWEP