HotBrick Network Solutions
9. Select LAN & DHCP from the menu. You will see a screen like the example below.
Figure 2-3: LAN & DHCP
10.Ensure these settings are suitable for your LAN:
•The default settings are suitable for many situations.
•See the following table for details of each setting.
11.Save your data, then go to Step 2, Installing the VPN 800/2 Firewall Router in your LAN.
Settings – LAN & DHCP
IP Address | IP address for the VPN 800/2 Firewall Router, as seen from the local LAN. |
| Use the default value unless the address is already in use or your LAN is |
| using a different IP address range. In the latter case, enter an unused IP |
| Address from within the range used by your LAN. |
Subnet Mask | The default value 255.255.255.0 is standard for small (class "C") networks. |
| For other networks, use the Subnet Mask for the LAN segment to which the |
| VPN 800/2 Firewall Router is attached (the same value as the PCs on that |
| LAN segment). |
|
|
Page 10