LED Signal Lights |
Red Signal Light
Indicate problems and notify users a problem occurs on the printer. Different blinking times indicate different problems.
Blinking Times | Reason | Solutions |
|
|
|
1 | Ribbon door is opened. | Close the top cover of the printer. |
|
|
|
2 | No ribbon cartridge installed. | Install a ribbon cartridge. |
|
|
|
3 | Run out the ribbon cartridge. | Replace the old ribbon cassette with a new one. |
|
|
|
4 | No paper left in the paper | Place more paper to the paper cassette. |
| cassette. |
|
|
|
|
5 | Paper jammed. | Remove the paper jammed. If you can’t remove the paper, |
|
| turn off the printer and then turn it on about 1 minute later. The |
|
| printer will move it out automatically. |
|
| Note: The Ribbon Door has to be closed. |
|
|
|
6 | Paper type mismatching. | Modify the paper type setting by choosing Control Panel > |
|
| Printer > HiTi 640DL > Properties > Paper type. Choose |
|
| PhotoDésirée as paper type if you are printing using the |
|
| PhotoDésirée application. |
|
|
|
45 |