Hansol Multitech D17CL specifications OSD Menu Moire, Language, OSD Position, Color Mode

Controls

	OSD MENU	MENU		+
8. MOIRE		Odd press	Contros the amount of selected		Exit to No.2
		: Selects and blinks the	function. Please control these key
	MOIRE CONTROL	function with RED ICON	in order the image not to shiver.
	H. MOIRE ADJUST
	V. MOIRE ADJUST	Even press	Moves to function you want.
		: Stops blinking and
	50	ready to move function
		you want.
9. LANGUAGE		Selects the languages	Moves to language you want.		Exit to No.2
		with RED ICON and
	LANGUAGE	Exit to No.2
	ENGLISH
	DEUTSCH
	FRANÇ AIS
	ESPAÑ OL
	PORTUGUÊ S
	PRESS MENU KEY
10. OSD POSITION		Toggles OSD position	Moves the OSD	Moves the OSD Exit to No.2
		horizontally or vertically.	menu left or	menu right or
	OSD H.POSITION		down in the	up in the
			selected	selected
			function.	function.
	50
11. COLOR MODE		Odd press	Moves to color mode you want		Exit to No.1
		: Blinks the RED ICON	and the selected “color mode”
	COLOR - TEMP	- color menu ICON.	will blink.
		Even press	Moves to function you want.		Exit to No.1

Controls

OSD MENU	MENU		+
13. ZOOM	Odd press	Shinks the	Expands the	Exit to No.1
ZOOM	: Selects zoom and	image	image
	blinks the zoom ICON.	horizontally	horizontally
		and vertically.	and vertically.

50 Even press Moves to the function you want. Exit to No.1

:Stops blinking and ready to move anther function.

Recall (	) : Recall control to the factory setting resets all the controls within the all menu.
	If you want to return to the factory mode setting, press Recall key 5~8 Sec
	continuously.

Degauss : Eliminates the build-up of stray magnetic fields which alter the correct scan of the electron beams and affect the purity of the screen colors, focus, and convergence. When pressed, you screen image will jump and waver a bit as the screen is demagnetized.

Caution : Please allow aminimum of 20 minutes to elapse between uses of the Degauss button. Do not hold the button down continuously to avoid decreasing the life the Deguass circuitry.

ENGLISH

USER	6500K 9300K	: Stops blinking and
		ready to move function
		you want.
		When the color mode	_	_	_
		ICON is blinking in user
		mode, press, then go to
		color adjust mode
		No.12.

Geometry Controls Menu

GEOMETRY

PINCUSHION

PARALLELOGRAM

TRAPEZOID

PINBALANCE

ROTATION

50

The Geometry controls allow you to adjust the curvature or angle of the sides of you display.

12. COLOR ADJUST					Odd press	Controls the amount of function	Exit to No.11
	MODE				: Selects and blinks the	you want.
					function you want.
		RB	GB BB RG GG BG
	USER			50
					Even press	Moves to the function you want.	Exit to No.11
	RB - Red background raster
					: Stops blinking and
	GB - Green background raster
					ready to move function
	BB - Blue background raster
	RG - Red level gain				you want.
	GG - Green level gain
	BG - Blue level gain

10 User’s Manual

Pincushion	: Increases or decreases the curvature of the sides either inward or outward.
Parallelogram : Increases or decreases the tilt of the sides either to the left or right.
Trapezoid	: Increases or decreases the bottom of the screen to be the same as the top.
Pin Balance	: Increases or decreases the curvature of the sides either to the left or right.
Rotation	: Increases or decreases the tilt of the screen image relative to a horizontal line.

User’s Manual 11