Notch
Remove
RAM SIMM or
ROM
Card
Notch |
Install |
RAM |
SIMM or |
ROM |
Card |
10.The ROM and RAM cards are at the right of the controller board. Remove the ROM card to get better access to the RAM slots.
Note: Your controller board may vary from the one shown. Some Elite 12 models ship without a physical ROM card in place.
If your printer has a ROM card in the slot to the left, remove it as follows:
a.Place your index fingers under the back edge of the ROM card.
b.Using your thumbs, slowly push the two retaining clips outward until the clips clear the top surface of the ROM card.
c.Pivot the ROM card away from the retaining clips and remove the ROM card from the socket.
d.The ROM card has a notch in it; this must be at the top of the contacts when you reinstall it.
e.Put the ROM card in a safe place; after you have installed the RAM you will need to reinstall it.
5