Genicom P45 user manual Hardware Installation, Jumper Settings, Clear Cmos Data

E

English

English

Chapter 2 - Hardware Installation

Jumper Settings

Clear CMOS Data

Clearing CMOS Data using Jumpers

JP8	X	3	3
		2	2
		1	1
	1-2 On: Normal		2-3 On:
	(default)		Clear CMOS Data

JP2	1	2	3	1	2	3
	X			2-3 On:
	1-2 On: Normal
	(default)			Clear CMOS Data

If you encounter the following,

a)CMOS data becomes corrupted.

b)You forgot the supervisor or user password.

c)The overclocked settings in the BIOS resulted to the system’s in- stability or caused system boot up problems.

you can reconfigure the system with the default values stored in the

ROM BIOS.

JP8 is accessible from the rear panel of the system. This provides convenience by allowing you to clear the CMOS without having to remove the chassis cover.

10