Genicom P45 user manual English LEDs, Dram Power LED, Standby Power LED, Diagnostic LED

E

English

English

LEDs

DRAM

Power LED

Standby	Diagnostic
	LED
Power LED

DRAM Power LED

This LED will light when the system’s power is on.

Standby Power LED

This LED will light when the system is in the standby mode.

Diagnostic LED

The Diagnostic LED displays POST codes. POST (Power-On Self Tests) which is controlled by the BIOS is performed whenever you power-on the system. POST will detect the status of the system and its components. Each code displayed on the LED corresponds to a certain system status.

.	..Warning:
	.
	. .
	.
	.
	When the DRAM Power LED and/or Standby Power LED lit red,
	it indicates that power is present on the DIMM sockets and/or
	PCI slots. Power-off the PC then unplug the power cord prior to
	installing any memory modules or add-in cards. Failure to do so
	will cause severe damage to the motherboard and components.

22