Chapter 5. Using BCAdmin™
a. IP Address b. Subnet Mask
c. Default Gateway d. DNS Server
You may need to contact your network administrator in order to determine the correct settings.
Forwarding Settings
The "Forwarding" tab contains controls for configuring inbound NAT translation for BreadCrumb devices configured as gateways.
Figure 5-11. BreadCrumb Properties - Forwarding Tab
To forward traffic through a BreadCrumb device in Gateway Mode or Gateway (Ingress) mode, you must know:
•The IPv4 port(s) used by the forwarded traffic (e.g., 25 for SMTP, 80 for HTTP, etc.).
•The TCP protocol(s) used by the forwarded traffic (TCP and/or UDP).
•The IPv4 address to which the forwarded traffic is to be forwarded.
•The IPv4 port(s) at the destination address to which the forwarded traffic is to be forwarded (usually the same as the ports described above).
34