Chapter 2 Installation Instructions
CPU
This motherboard accepts Intel socket 478 processors (CPUs) with a front side bus (FSB) of 400/533/800 MHz processors with
Warning :
The CPU pins must be properly aligned with the holes in the socket, otherwise the CPU may be damaged.
Installation of CPU
Follow these steps to install a CPU.
1.Unlock the socket by pressing the lever sideways, then lift it up to a 900 angle.
2.Align the cut edge to the gap in the base of the socket. Carefully insert the CPU into the socket until it fits in place.
90°
Gap in the base
Cut edge | Push down the socket | |
lever to secure the CPU | ||
|
3.When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
10 | 661M03 Series User Manual |
|