|
|
AC Power Conditioning & Suppression Module | |
|
|
General |
|
Type | AC Power Conditioner & Suppressor Module |
Power Requirements | 120V 60Hz |
Power Consumption | .5W |
RoHS Compliant | Yes |
Panel |
|
Switched Outlets | Two, 20A |
Spike & Surge Suppression | |
Manual Override | Slide switch |
Extreme Voltage Shutdown | (EVS) Below 101V or Above 132V AC Line (When Used With |
Connectors | 5 Position Phoenix Euro Block Style |
Fuse Protection | 20A Slow Blow |
DCV Remote Trigger | 5 – 24DCV |
Remote Trigger | SPST Contact |
Status Signals | Output for Voltage and Current Data (All Signals are Low Voltage and Low Current) |
Indicators | Incoming AC, Active, AC Fault |
Power Cord | 9' (3M), |
Technical Data |
|
Current Rating | 20 amps |
Operating Voltage | 102 to 132 VAC |
High Voltage Surge Protection | Trigger at 133VAC, 1ms Typically (When Used With |
Spike & Surge Suppression | |
Low Voltage Protection | Trigger 101 VAC, 1ms Typically (When Used With |
Spike Protection Modes | Circuitry on Incoming AC Mains. |
Minimum Spike Clamping Voltage | 460 VRMS @ 3,000 amps |
Maximum Spike Clamping Voltage | 6000v |
Maximum Spike Clamping Response Time | 1 nanosecond |
Spike Clamping Voltage @ 100A | 1250Vp for 20µs |
Maximum surge current | 6,500 amps |
Energy Rating @ 2ms | 600 Joules |
Noise Attenuation EMI/RFI Sequencer | 10dB @ 10kHz, 40dB @ 100kHz, 100dB @ 10MHz |
Temperature Range | 5° to 35°C |
Humidity Range | 5% to 95% R.H. |
Mechanical |
|
Chassis Finish | Black |
Mounting | Side bracket adjustable |
Dimensions | 3.0" H x 8.5" D x 3.5" W (76mm x 216mm x 89mm) |
Weight | 5.5lbs (2.49kg) |
Agency Listings | MET (UL1449 Code) |
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone:
– 15 – | ETAsys.com |
Specifications are subject to change without notice.