ETA Systems ETA-20SH specifications Limited Warranty, Service

Page 16

ETA-20SH

AC Power Conditioning & Suppression Module

LIMITED WARRANTY

All products manufactured by ETA Systems are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any. This warranty shall extend from the date of purchase for a period of one year. Additionally, fuses and lamps carry no warranty. ETA Systems will solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered, serviced or installed in other than a workmanlike manner. The original sales invoice should be retained as evidence of purchase under the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to ETA Systems do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor unless there is included with the returned product(s) a written request for an estimate of repair costs before any non-warranty work is performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transportation charges collect.

EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL DAMAGES FOR PERSONAL INJURY, ETA SYSTEMS SHALL NOT BE LIABLE IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

ETA Systems does not assume, nor does it authorize any other person to assume or extend on its behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.

SERVICE

Should your ETA-20SH require service, please contact the

ETA Systems warranty department at

1-877-689-8055, ext. 277 to obtain an RA number.

ETA Systems Tech Support can be reached at 1-800-321-6699.

Visit our web site at www.ETAsys.com to see other ETA Systems products.

©2009 ETA Systems All rights reserved. ETA003566 RevA 05/09

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 16 –

ETAsys.com

Specifications are subject to change without notice.

Image 16
Contents ETA-20SH AC Power Conditioning & Suppression Module Table of ContentsIntroduction KEY FeaturesApplications ETA-20SH Safety Instructions EMI/RFI Filters AC Spike ProtectionAC Surge Protection EVS ProtectionPanel Features AC Mains Power Cord 9 3m, 12-gaugeECM Data Wire and Distance Using the ETA-20SH AS a Standalone UnitRemote Activation VIA Switch or DCV Trigger Wiring with AN ETA-ECS6RM Sequencer ControllerSingle ETA-ECM20 Control Port ETA-ECS6RM Sequencer Controller Interface with ETA-20SHRelay Contacts Wiring With an ETA-ECS3 Sequencer Controller Troubleshooting the ECM Module AS a Standalone Unit Troubleshooting the ECM Module with AN ETA-ECS3 Troubleshooting the ECM Module with AN ETA-ECS6RM Issue 1 Incoming AC LED on the ECM is not illuminatedIssue 6 No Voltage Reading at the ETA-ECS6RM ETA-20SH Specifications Limited Warranty Service