Eurotech Appliances COM-1460 user manual Ram, Rom, Scsi, Secam, Ssd, Uart, Usb, Vga, Wan

Page 35

PC/104-PlusCOM-1460 Module

35

 

 

 

 

R

RAM

RAM (Random Access Memory). Semiconductor-based memory that can be read-from and written-to by the microprocessor or other hardware devices.

ROM

ROM stands for Read Only Memory. This memory can only be read-from but not written-to.

S

SCSI

SCSI stands for Small Computer System Interface. It is an I/O bus designed as a method for connecting several classes of peripherals to a host system without requiring modifications to generic hardware and software.

SECAM

SECAM (Sequential Couleur a Memoire; Sequential Colour with Memory). The television standard for France, Russia, and most of Eastern Europe. As with PAL, SECAM is based on a 50-Hz power system, but it uses a different encoding process and displays 819 horizontal lines per frame at a scan rate of 25 frames per second (50 fields per second). See also NTSC and PAL format.

SMBus

SMBus (System Management Bus). A two-wire interface based on the I²C protocol. The SMBus is a low- speed bus that provides positive addressing for devices, as well as bus arbitration.

SSD

SSD stands for Solid State Disk (i.e. Disk on Chip, Disk on Module, Flash ROM,).

In fact this is not a real disk but a silicon support memory without mechanical parts that are in movement.

U

UART

UART (Universal Asynchronous Receiver/Transmitter), is a module composed of a circuit that contains both the receiving and transmitting circuits required for asynchronous serial communication.

USB

USB (Universal Serial Bus) is a 4-pin bi-directional, isochronous, dynamically attachable serial peripheral bus that is capable of cascading low/medium speed peripherals (less than 10 Mbit/s)

V

VGA

VGA Video graphics array. A video adapter that supports 640 × 480-pixel colour resolution. A video display standard for boot devices under Windows operating systems.

W

WAN

WAN stands for a wide-area network and it is a system of LANs (in geographically separated areas) connected together via telephone lines and/or radio waves.

Image 35
Contents COM-1460 About this Manual Conventions This page is intentionally left blank Contents Glossary Acronyms and Abbreviations Product Overview Product Definition COM-1460 PC/104-Plus Module characteristicsCOM-1460 module’s functional blocks Jumper Description = Open Jumper Layout and ConfigurationJP3 JP1JP2 This page is intentionally left blank Connectors Description PCI BUS Connectors LayoutPCI BUS J1, J2 for the ISA Bus and J3 for the PCI BusISA BUS Module Stack J10 for Main Power J7, J8, J9 for FirewireThis page is intentionally left blank Troubleshooting Technical/Sales Assistance Common Problems and SolutionsTroubleshooting a PC/104-Plus System Returning For Service This page is intentionally left blank RMA This page is intentionally left blank Appendix Absolute Maximum Ratings Electrical and Environmental SpecificationsOperating Characteristics Mtbf Module Dimensions Mechanical DimensionsSafety Summary Reliability Disclaimer of WarrantyEMI Caution CE NoticeAtapi BiosGlossary ATADevice CPUCvbs DMAIRQ HDCIDE IeeeNtsc MpegNdis NMISecam RAMROM ScsiThis page is intentionally left blank Scsi Acronyms and AbbreviationsTechnical & Sales Assistance