Eurotech Appliances COM-1460 Cpu, Cvbs, Dma, Device, Ecp, Eeprom, Eprom, Ethernet, Fdc, Fifo

Page 32

32

PC/104-PlusCOM-1460 Module

 

 

 

 

C

CPU

CPU (Central Processing Unit) is the heart (computational and control unit) of a computer. This device interprets and executes instructions.

CVBS

CVBS Composite Video Broadcasting Signal

D

DMA

The Direct Memory Access is a technique for transferring data from the memory to a device. Data doesn’t pass through the CPU.

DEVICE

It is any circuit performing a specific function.

E

ECP

Extended Capabilities Port. An asynchronous, 8-bit–wide parallel channel defined by IEEE 1284-1944 that provides PC-to-peripheral and peripheral-to-PC data transfers.

EEPROM

EEPROM (also known as E2PROM) stands for Electronic Erasable Programmable ROM. This type of memory can be re-programmed by electronic signals.

EPROM

EPROM stands for Erasable Programmable ROM.

This type of memory can only be erased by ultra-violet (UV) light.

ETHERNET

It is a type of Local Area Network (LAN) architecture. Ethernet supports data transfer rates of 10Mbps.

A newer version of Ethernet, called Fast Ethernet (or 100Base-T), supports data transfer rates of 100 Mbps. And the newest version, Gigabit Ethernet supports data rates of 1 Gbit (1000 megabits) per second.

F

FDC

Floppy Disk Controller. A special-purpose chip and associated circuitry that directs and controls reading from and writing to a computer’s disk drive.

FIFO

First in/first out. A method for processing a queue in which items are removed in the same order in which they were added.

Flash ROM

Flash ROM (like EEPROM) can be re-programmed by electronic signals. Usually a Flash ROM has a capacity of 1MB.Into this memory usually resides BIOS and other useful programs or instructions.

Image 32
Contents COM-1460 About this Manual Conventions This page is intentionally left blank Contents Glossary Acronyms and Abbreviations Product Overview Product Definition COM-1460 PC/104-Plus Module characteristicsCOM-1460 module’s functional blocks Jumper Description Jumper Layout and Configuration = OpenJP3 JP1JP2 This page is intentionally left blank Connectors Description Connectors Layout PCI BUSPCI BUS J1, J2 for the ISA Bus and J3 for the PCI BusISA BUS Module Stack J7, J8, J9 for Firewire J10 for Main PowerThis page is intentionally left blank Troubleshooting Technical/Sales Assistance Common Problems and SolutionsTroubleshooting a PC/104-Plus System Returning For Service This page is intentionally left blank RMA This page is intentionally left blank Appendix Absolute Maximum Ratings Electrical and Environmental SpecificationsOperating Characteristics Mtbf Mechanical Dimensions Module DimensionsSafety Summary Disclaimer of Warranty EMI CautionCE Notice ReliabilityBios GlossaryATA AtapiCPU CvbsDMA DeviceHDC IDEIeee IRQMpeg NdisNMI NtscRAM ROMScsi SecamThis page is intentionally left blank Acronyms and Abbreviations ScsiTechnical & Sales Assistance