Sending Scan File by E-mail

When selecting a sender from the list

APress [Attach Sender's Name].

B Select the sender.

Note

rWhen a protection code has been set, a screen for entering the protection code appears after selecting the sender. En- ter the protection code, and then press [OK]. When the protection code you entered is correct, the sender name is displayed.

C For a reception confirmation e- mail, press [Return Receipt].

Note

rWhen [Return Receipt] is select- ed, an e-mail notifying that the e-mail has been read by the destination party is sent to the sender selected here. Howev- er, if the mailing software used by the destination party does not support MDN (Mes- sage Disposition Notification), the e-mail may not be sent.

DPress [OK].

Using a registration number to specify a sender name

APress [Attach Sender's Name].

B Use the number keys to enter the five-digit registration number that has been assigned 4 to a sender.

If the entered number is less than five digits long, press the {#}key after the last number.

Example: To enter 00008

Press the {8} key, and then press the {#}key.

Note

rWhen a protection code has been set, a screen for entering the protection code appears after selecting the sender. En- ter the protection code, and then press [OK]. When the protection code you entered is correct, the sender name is displayed.

C For a reception confirmation e- mail, press [Return Receipt].

53

Page 63
Image 63
Savin 2045e When selecting a sender from the list, Using a registration number to specify a sender name, Select the sender