Preparations for Use as a Network Scanner

Recalling a Program

A Make sure the {Scanner}key is se-

lected, press the {Program}key.

B Press [Recall].

Deleting a Program

A Make sure the {Scanner}key is se-

lected, press the {Program}key.

B Press [Delete].

2

C Press the number of the program you want to recall.

The stored settings are displayed.

Note

rProgram numbers with m al- ready have settings in them.

D Place the originals, and then press the {Start}key.

Changing a Stored Program

A Make sure the {Scanner}key is se-

lected, press the {Program}key.

B Press [Recall].

C Press the number of the program you want to change.

D Change settings of the program. E Press the {Program}key.

F Press [Register].

G Press the number of the program you changed the setting.

H Press [Register] to accept the con- firmation message.

I Enter a program name.

J Press [OK].

C Press the number of the program you want to delete.

D Press [Yes].

The program is deleted, and the display returns to the initial dis- play after a moment.

Changing the program name

A Make sure the {Scanner}key is se-

lected, press the {Program}key.

B Press [Change Name].

C Press the number of the program you want to change name.

D Enter a new program name.

A program name can be entered up to 40 characters.

For details about entering charac- ters, see “Entering Text”, General Settings Guide.

E Press [OK].

The display returns to the initial display after a moment.

24

Page 34
Image 34
Savin 2045e appendix Recalling a Program, Deleting a Program, Changing a Stored Program, Changing the program name