Network Scanner

Control Panel

This illustration shows the control panel when options are installed.

1

ZHSS011N.eps

1.{User Tools/Counter}key

Use to change default or operation pa- rameters according to the operating con- ditions.

2.Display panel

Displays the operation status and mes- sages.

3.{Check Modes}key

Press to check the destinations which are currently selected.

4.{Program}key

Use to register settings used frequently as a program or to recall the registered pro- gram.

5.{Clear Modes}key

Press to clear the current settings.

6.{Energy Saver}key

Press this key to begin warm-up. Pressing this key again while in warm-up mode cancels warm-up.

Note

rThis key is inactive while scanning or setting scanner defaults.

ZHSS011N

7.{Interrupt}key

Press this key to interrupt the scanner mode and to activate the copy mode.

8.Main power indicator and power indicator

The main power indicator lights up when the main power switch is set to on. The power indicator lights up when the ma- chine is on.

Important

rDo not turn off the main power while the power indicator is lit or blinking. Doing so may cause a failure of the hard disk.

9.Operation switch

Press this switch to turn the machine on. The power indicator lights up. To turn the machine off, press this switch again.

Note

rThis key is inactive while scanning or setting scanner defaults.

8

Page 18
Image 18
Savin 2045e appendix Control Panel