![](/images/new-backgrounds/1272644/27264493x1.webp)
Placing Originals
vWhen placing the original so that the top edge touches the top left of the exposure glass
When using the machine as a network TWAIN scanner, this orientation is the standard set- ting for the TWAIN driver. Nor- mally, use this orientation for placing originals.
ZHSY040N |
Placing in the Auto Document Feeder
The ADF allows you to place multiple originals at one time. Originals placed in the ADF can be scanned on one side or both sides.
vOriginals that can and cannot be
placed in the ADF | 3 |
For information about the origi- |
nals that can and cannot be placed in the ADF, see Copy Reference. Attempting to use unsuitable orig- inals in the ADF can lead to a mis- feed and damage to the originals. Place such originals directly on the exposure glass.
1.Positioning mark
C Lower the exposure glass cover or the ADF.
D Select the original orientation ac- cording to the orientation of the placed original.
![](/images/new-backgrounds/1272644/27264493xi2.webp)
Reference
p.35 “Specifying original orien- tation and setting originals”
Proceed to p.39 “Original Orienta- tion and Scan Area”.
Important
rFor information about which original sizes can be detected automatically and notes on placing originals in the ADF, see Copy Reference.
A Adjust the original guide to match the size of the originals.
B Place the originals with the side to be scanned facing up. (For orig- inals which are to be scanned on both sides, the first side should face up.)
There are two orientations.
37