Sending Scan File by Scan to Folder
69
5
If the entered number is less
than five digits long, press the
{#} key after the last number.
Example: To enter 00002
Press the {2} key, and then
press the {#} key.
Note
rWhen a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. When the
protection code you entered
is correct, the sender name is
displayed.
CPress [OK].
Searching to select a sender
APress [Attach Sender's Name].
BPress [].
CPress [User (Dest.) Name].
The soft keyboard is displayed
for entering a sender name.
DEnter part of the sender name.
Note
rEnter the first character or
characters of the sender
name.
rIt is necessary to differentiate
between capital and small
letters.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
EPress [OK].
FSelect the sender.
Note
rWhen a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. When the
protection code you entered
is correct, the sender name is
displayed.
GPress [Exit].
HPress [OK].