Cisco Systems SGH-Blast Series manual When you want to end the multi-party call, press the key

t729.book Page 27 Thursday, July 5, 2007 3:47 PM

6.Press the Options soft key or the key. Select the Join option and

press the Select soft key or the key.

Note: There are a maximum of two callers that can be joined to a single multi-party line. Additional callers would participate in a new Multiparty session which can be held in conjunction with the previous multiparty call. Each of these multi-party calls can then be placed on hold or swapped.

Having a Private Conversation With One Participant

When there are two participants in a multi-party session, it might be necessary to place one of those participants on hold so that a private conversation can be held with a single caller. While you are in a multi-party call:

1.Press the Options soft key and choose the Split option. Press the Select

soft key or the key.

The short list of call participants then displays with the first caller selected.

2.Press the Up or Down Navigation key to highlight the person with which

you want to talk privately, and press the Select soft key or the key.

Note: You can now talk privately to that person while the other participants can continue to converse with each other. If there is only one other participant, that person is then placed on hold.

3.To return to the multi-party call, press the Options soft key and select

Join. Press the Select soft key or the key. All of the multi-party call participants can now hear each other again.

Dropping One Participant

1.Press the Options soft key and choose the Split option. Press the Select

soft key or the key. The short list of call participants displays.

2.Highlight the person you want to keep and press the Select soft key or the

key.

3.Press the Options soft key and highlight Remove. Press the Select soft

key or the key. The remaining participant on hold is highlighted.

4.Press the Select soft key or the key to drop the selected participant. This option allows you to continue talking to the other participants.

5.When you want to end the multi-party call, press the key.

27