Cisco Systems SGH-Blast Series manual Change PIN, Phone lock, Change password

t729.book Page 116 Thursday, July 5, 2007 3:47 PM

Security

Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.

The following options are available:

•Disable: the phone connects directly to the network when you switch it on.

•Enable: you must enter the PIN each time the phone is switched on.

Change PIN

This feature allows you to change your current PIN, provided that the PIN check feature is enabled. You must enter the current PIN before you can specify a new one.

Once you enter a new PIN, you are asked to confirm the PIN number by re-entering it.

Phone lock

When the Phone lock feature is enabled, the phone is locked and you must enter the 4- to 8-digit phone password each time the phone is switched on. Once the correct password is entered, you can use the phone until you switch it off.

The following options are available:

•Disable: you are not asked to enter the phone password when you switch on the phone.

•Enable: you are required to enter the phone password when you switch on the phone.

Change password

The Change password feature allows you to change your current phone password to a new one. You must enter the current password before you can specify a new one.

Once you enter a new password, you are asked to confirm the change by entering the password again.

Note: If you change your password, be sure to record it and keep it in a safe place. If you forget your password, contact your Service Provider for assistance.

Changing Your Settings 116